This is an PTW thread

[NVC]

last season's setup, defecting to the soviet block next

[ThunderCactus]

update on the PRS stock mod
after 3 weeks of waiting for the damn 15C 1200mah batts and mini deans, finally have a working setup lol
I could get the 1300s to work with some extra effort, but I don't feel the effort is worth another 10C and 100mah

[wildcard]

Originally Posted by ThunderCactus

update on the PRS stock mod
after 3 weeks of waiting for the damn 15C 1200mah batts and mini deans, finally have a working setup lol
I could get the 1300s to work with some extra effort, but I don't feel the effort is worth another 10C and 100mah

Why so low Frank? the minimum I'll go on any PTW is a 20C I even went up to a 25C, with that rear buffer you could put in a 11.1V 1500mah 25C battery no problem.

[FreelancerInc]

I agree with the minimum of 20c but if I remember my conversation with Brad the boards will stand a maximum draw upto a 25c. a 30c may do damage to your boards if there is a bad spike or overdraw.

our group has about 20@ 11.1v 1200mah 20c batteries with no current issues pertaining to under or over powered batteries

[ThunderCactus]

1) the 25C 1300mah batts are just a tad too long to fit
2) max length of battery I can put in there is 150mm
3) I don't want to run anything that isn't nanotech
4) I distinctly recall a few people running PTWs off 12C batteries... They were underpowered but for some reason never caught on fire during use or charging. Don't recall them swelling either but I know going up to 20C had a huge diff in ROF. My ROF is the same with the 15C's so the draw might be just under 18A. Time will tell anyway

[The CDN Hoople]

I'm THAT guy who paints a FCC 416 kit ;P Need a better optic for it though my Airsoft depot T1 wont raise the "POI" high enough to get a proper zero

[c3sk]

Forgot to post this up. Painted up FCC PTW Mk18 Mod 1.



Won't bother posting the breakdown, assume everything is legit in the photo with the exception of the suppressor.

[Wrath144]

Originally Posted by ThunderCactus

1) the 25C 1300mah batts are just a tad too long to fit
2) max length of battery I can put in there is 150mm
3) I don't want to run anything that isn't nanotech
4) I distinctly recall a few people running PTWs off 12C batteries... They were underpowered but for some reason never caught on fire during use or charging. Don't recall them swelling either but I know going up to 20C had a huge diff in ROF. My ROF is the same with the 15C's so the draw might be just under 18A. Time will tell anyway

That was me. 1100mah 15C.
They worked, but I upgraded fast.

[spartan117]

Here's my updated FCC hk416

[T@NK]

So, finally I jumped into this PTW pool.
Don't really have fund to upgrade the rails, optics and so on for now as the initial investment is a lot, so I decided to go for the old school way(as I always love the old school style). spent couple hours in my garage, dig into my junk pit and made sure everything fits on properly. might still need to change to a mk18 Wilcox M2 mount and a KAC foregrip later, but I think major parts are done.

hope it won't bring shame to this thread.

Tank

[c3sk]

No school like Oldschool. I like it. I wouldn't change anything about it Tank

[T@NK]

thanks budd

[captainafternoon]

Can't Stop Wont Stop.

[Cinco Boy]

Hot

[wildcard]

FCC armoury
Canadian Twins

Some are packed for night games and missing off the shelf