Which is the best pistol brand?

Drakker · March 27th, 2017, 12:01

They can take green gas/propane or duster (hfc134), but not CO2.

The HK45 is a fine choice, it seem to be really well made and the people I know using them are very happy with them.

lurkingknight · March 27th, 2017, 13:06

no. The gun has to specifically advertise it can take co2 and have mags that can accept a co2 canister.

both the tm 225 and hk45 are workhorses. I have had mine with an aluminum slide for the last 2 years and I use it a lot, no issues. A common issue if you can call them common.. are usually valve striker components or nozzles failing, but my hk45 has never had a problem.

I have 3 tm 5-7s that are in various states of self destruction though.

Dumblins · March 27th, 2017, 21:41

Yeah someone mentioned to stay away from the 5-7 so I wasn't exactly looking out for them. I don't really like the look too so...

I'm really into the hk45 right now, M&P9 and USP-C too they all look amazing and have good reviews.

SuperCriollo · March 28th, 2017, 12:36

Don't forget the TM Hi-capa ! Best aftermarket support, upgrade potential, awesome mag capacity, and comes stock with a metal mid frame.

RainyEyes · March 28th, 2017, 13:01

No. Most guns will take green gas/propane at best. Do NOT use co2 on a duster only gun and do not use co2 on a green gas/propane gun unless specified by manufacturer.

crownking · April 6th, 2017, 05:28

A question here, so far WE is the only brand have Gen4 Glock model~right ??

Kayakee · April 28th, 2017, 01:10

I'm looking on a WE G18C. (4th GEN)

I would prefer to get a Tokyo Marui but they are so hard to find. Few Canadian website have it but all the time sold out.

For a first G18C, is WE is a a good brand? I read that We is not too bad since 1-2 years

shelcoof · April 28th, 2017, 01:24

Quote:

Originally Posted by Kayakee

I'm looking on a WE G18C. (4th GEN)

I would prefer to get a Tokyo Marui but they are so hard to find. Few Canadian website have it but all the time sold out.

For a first G18C, is WE is a a good brand? I read that We is not too bad since 1-2 years

WE G18C is solid
Go buy it right now!

Kayakee · April 28th, 2017, 16:30

I'm lucky, I found A brand new TM G18C.

I'm going to get the ''precious'' next week. (May be I should give a name to my pistol. They are so hard to find lollll )

Now for the charger itself, shoul I stay with TM or the WE (which is compatible)

shelcoof · April 28th, 2017, 23:31

Quote:

Originally Posted by Kayakee

I'm lucky, I found A brand new TM G18C.

I'm going to get the ''precious'' next week. (May be I should give a name to my pistol. They are so hard to find lollll )

Now for the charger itself, shoul I stay with TM or the WE (which is compatible)

Should have went with a WE..... Works fine out of the box no upgrades required... unlike TM

If you went with HK3P you get the full trades
Also if you ever want to upgrade the HK3/WE its TM compatible
Meaning you can use the after market parts available for TM

BobbyDangerous · April 28th, 2017, 23:33

I have a WE Glock 17. Shoots fine. Just don't mess with it too much.

KJW P226. I used to own. Spits a lot of gas if it gets too cold.

TM has the most positive reviews but I have never had any experience with them.

Kayakee · April 29th, 2017, 16:05

Quote:

Originally Posted by shelcoof

Should have went with a WE..... Works fine out of the box no upgrades required... unlike TM

Well.... we never known. I will get a second pistol and It will probably be a WE.

TM is nice but it cost me 50% more than a WE. My birthay is coming then I took the G18C reference.

Kungpow · April 29th, 2017, 19:00

Quote:

Originally Posted by shelcoof

Should have went with a WE..... Works fine out of the box no upgrades required... unlike TM

If you went with HK3P you get the full trades
Also if you ever want to upgrade the HK3/WE its TM compatible
Meaning you can use the after market parts available for TM

TM Glocks should work out of the box.
If you get a TM you get the full trades.

If you wanted to upgrade the internals of the pistol, I would recommend
a WE or HK3P Gen 4 Glock. The TM Glock already performs well, so there is
little reason to upgrade.

crownking · May 9th, 2017, 03:38

Anyone try Armorer works? I got a Hi-capa model from Armorer works, it works better than I expect. CNC slide, aluminum alloy frame , nice and firm barrel unit, I like the trigger pull just as light as other upgraded hi-capa

BioRage · May 9th, 2017, 09:27

Armorer Works - it's just a re-brand of WE hi-capas.. and we all know WE hi-crapas are a no go.

These MAY be slightly better, but you are better off using a TM.

Source:

http://imgur.com/a/HCe3h

whatever floats your goat, there are people who buy Bell pistols after-all, so, - ¯\_(ツ)_/¯

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 27th, 2017, 12:01	#31
Drakker Official ASC Geomorphologist Trader rating Join Date: Sep 2009 Location: Montr?al south shore, Qc	They can take green gas/propane or duster (hfc134), but not CO2. The HK45 is a fine choice, it seem to be really well made and the people I know using them are very happy with them. __________________ Keep quiet. Sound travels faster than BBs. Québec province's master age verification representative.

March 27th, 2017, 13:06	#32
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	no. The gun has to specifically advertise it can take co2 and have mags that can accept a co2 canister. both the tm 225 and hk45 are workhorses. I have had mine with an aluminum slide for the last 2 years and I use it a lot, no issues. A common issue if you can call them common.. are usually valve striker components or nozzles failing, but my hk45 has never had a problem. I have 3 tm 5-7s that are in various states of self destruction though. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. Last edited by lurkingknight; March 27th, 2017 at 13:11..

March 28th, 2017, 12:36	#34
SuperCriollo Trader rating Join Date: Apr 2009 Location: Kitchener, ON	Don't forget the TM Hi-capa ! Best aftermarket support, upgrade potential, awesome mag capacity, and comes stock with a metal mid frame. __________________ SuperCriollo

March 27th, 2017, 21:41	#33
Dumblins Trader rating Join Date: Feb 2017 Location: Laurentides	Yeah someone mentioned to stay away from the 5-7 so I wasn't exactly looking out for them. I don't really like the look too so... I'm really into the hk45 right now, M&P9 and USP-C too they all look amazing and have good reviews.

March 28th, 2017, 13:01	#35
RainyEyes Trader rating Join Date: Sep 2013 Location: Scarbororororough	No. Most guns will take green gas/propane at best. Do NOT use co2 on a duster only gun and do not use co2 on a green gas/propane gun unless specified by manufacturer.

April 6th, 2017, 05:28	#36
crownking Trader rating Join Date: Mar 2017	A question here, so far WE is the only brand have Gen4 Glock model~right ??

April 28th, 2017, 01:10	#37
Kayakee Trader rating Join Date: Apr 2017 Location: St-Lazare, QC	I'm looking on a WE G18C. (4th GEN) I would prefer to get a Tokyo Marui but they are so hard to find. Few Canadian website have it but all the time sold out. For a first G18C, is WE is a a good brand? I read that We is not too bad since 1-2 years

April 28th, 2017, 16:30	#39
Kayakee Trader rating Join Date: Apr 2017 Location: St-Lazare, QC	I'm lucky, I found A brand new TM G18C. I'm going to get the ''precious'' next week. (May be I should give a name to my pistol. They are so hard to find lollll ) Now for the charger itself, shoul I stay with TM or the WE (which is compatible)

April 28th, 2017, 23:33	#41
BobbyDangerous Trader rating Join Date: Mar 2010 Location: Oshawa	I have a WE Glock 17. Shoots fine. Just don't mess with it too much. KJW P226. I used to own. Spits a lot of gas if it gets too cold. TM has the most positive reviews but I have never had any experience with them. __________________ -Dangerous- BA Level 3 Certified

May 9th, 2017, 03:38	#44
crownking Trader rating Join Date: Mar 2017	Anyone try Armorer works? I got a Hi-capa model from Armorer works, it works better than I expect. CNC slide, aluminum alloy frame , nice and firm barrel unit, I like the trigger pull just as light as other upgraded hi-capa

May 9th, 2017, 09:27	#45
BioRage Trader rating Join Date: Nov 2008 Location: Toronto	Armorer Works - it's just a re-brand of WE hi-capas.. and we all know WE hi-crapas are a no go. These MAY be slightly better, but you are better off using a TM. Source: http://imgur.com/a/HCe3h whatever floats your goat, there are people who buy Bell pistols after-all, so, - ¯\_(ツ)_/¯ Last edited by BioRage; May 9th, 2017 at 09:29..

Which is the best pistol brand?

Airsoft Guns Discussion