|
|
|
October 3rd, 2011, 23:12
|
#31 | ||
|
Cobalt Caliber
|
Quote:
__________________
Quote:
|
||
|
|
|
October 5th, 2011, 20:22
|
#32 | |
|
Quote:
__________________
AKA SLEDGE 
|
|
|
|
|
|
October 5th, 2011, 20:32
|
#33 | |
|
Suburban Gun Runner
|
I just received my PTS today. So a quick comparison between the A&K and PTS versions.
The PTS version is lighter than the A&K and has a thinner pistol grip. Also the charging handle is in a more forward position. I personally think the A&K version has nicer trades as well as a nicer finish. Internally there is no comparison, the PTS blows the A&K away. But as the A&K has a 100% TM compatible gearbox and inner barrel it can easily be made a true competitor. The A&K's only true weak point is its proprietary hop up unit which is made of brittle clear plastic. And if it breaks you are pretty well fucked. A&K released a metal nozzle and hop up parts but you still need to use some of the stock parts and the machining is very poor making the metal hop up useless.
__________________
Quote:
|
|
|
|
|
|
October 6th, 2011, 04:42
|
#34 |
|
I recently picked up a new Magpul Masada PTS, out of the box accuracy was moderate, fps was consistently good but BBs hooked left and some right, put a Maddbull AK length Barrel (stock barrel a little short for a full length Cyl loss of some fps ) with Guarder hop rubber, now accuracy is good, not a tack driver but good, I found the hop adjustment rod has not enough adjustment to get full hop on ..025 BBs (this was with stock rubber and new one) I cut a small piece of the stock rubber laid it on top of the new hop rubber with a very thin layer of liquid tape (as to not effect the hop but keep it in place while assembling) it now will adjust a .025 BB but almost at its full adjustment, I would not be able to run say .028s! it also has barrel wobble, not a lot but the quick detachable barrel system is not rock solid when you twist the bbl in, I may use some Teflon tape to take up some thread tolerance but it doesn't seem to be effecting accuracy ..yet?.
I have used the gun in three games and dumped approx 4000rds with no inturnal issues, trigger issues, the gear box sounds fine, motor whines a bit even after adjustment, it shoots 390fps and I use a 9.6 Ak battery. I feel the gun has some great features and built with good materials, its balance and feel are great, I am a little disappointed in the out of box usability though, for the price they are they should be ready to go, especially when you look at some other manufactures that sell guns for $150-$200 less and your accuracy and dependability are similar?? At this point though I like it very much, had to spend to much time tuning and extra money to get it there but oh well I have confidence in it now so we will see! next part to replace will be the motor as suggested by Kampfer. |
|
|
|
|
October 6th, 2011, 12:19
|
#35 | |
|
Cobalt Caliber
|
Yea the AK batteries fit very nicely in the handguard. No movement nothing I keep both of mine in there during games, 1 for use 1 for backup.
__________________
Quote:
|
|
|
|
|
|
October 7th, 2011, 13:19
|
#36 |
|
A&K or Magpul?
Looking at picking one up, soo, which would be the better bet, A&K or Magpul?
__________________
|
|
|
|
|
October 7th, 2011, 13:39
|
#37 | ||
|
Suburban Gun Runner
|
Quote:
__________________
Quote:
|
||
|
|
|
|
October 7th, 2011, 15:39
|
#38 | |
|
Cobalt Caliber
|
Magpul one, I have heard many a bad thing about the A&K version.
__________________
Quote:
|
|
|
|
|
|
October 7th, 2011, 17:06
|
#39 |
|
|
Comparing the two based on price alone, the A&K wins. From what I've read the internals aren't really that different.. I'm a magpul whore normally so I'm leaning that way I'm just wondering if it's really worth it.
__________________
|
|
|
|
|
October 7th, 2011, 21:50
|
#40 |
|
What about going with the PTS for the nice externals and replacing the mech box completely?
Are the PTS mags fitting well are they loose? |
|
|
|
|
October 8th, 2011, 01:50
|
#41 |
|
Harvester of Noobs' Sorrow
|
the gearbox of the PTS ACR is made by Ares.. i think that says it all.
__________________
Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯. |
|
|
|
|
October 8th, 2011, 02:31
|
#42 | |
|
|
Quote:
__________________
Last edited by bizkilter; October 8th, 2011 at 04:12.. |
|
|
|
|
|
October 8th, 2011, 02:35
|
#43 | |
|
Cobalt Caliber
|
hmm PTS masada has a problem not sure what it is though. But I don't have a day off or time to look at it till Wednesday. I'll keep everybody up to date.
__________________
Quote:
|
|
|
|
|
|
October 8th, 2011, 06:16
|
#44 | |
|
Harvester of Noobs' Sorrow
|
Quote:
__________________
Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯. |
|
|
|
|
|
October 8th, 2011, 10:39
|
#45 | |
|
Quote:
|
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
