This is an PTW thread

mcguyver · October 17th, 2011, 02:12

Width is largely irrelevant. It will fit any manufactured cell that is less that 1"

The OD of a milspec buffer is 1.14", and the commercial is 1.17". ID is always the same for every buffer, it has to be that way.

Rookie Ab · October 17th, 2011, 11:12

I modded one of Kev's old 15c batteries and it measures 21mm x 18mm x 106mm

[IMG]

[/IMG]

The flap of tape is to pull the battery back out of the tube.
The balance plug fits into a recess in the back or the tube.

[IMG]

[/IMG]

I still am going to shorten the leads coming from the board another 10mm and that will straighten and keep the wires tight to the battery.

Karma_ · October 17th, 2011, 12:22

When I did one I shaved some of the end of the buffer tube out for the deans to sit in. It gave it more room and didn't ruin any of the structural integrity. It's snug but not a bad way to go.

Looks good Greg.

Karma_ · December 1st, 2011, 19:43

My 416 PTW. I am sooo in love.

Just waiting for an AAC flash hider and a Crane stock, although I might keep the MOD stock.

MilanWG · December 1st, 2011, 19:51

Bad ass dude - nice job.

wey ferro · December 1st, 2011, 20:22

Looks decent but shoots like crap!

Beowulfe · December 1st, 2011, 20:39

Looks great, Chris.

Karma_ · December 1st, 2011, 21:27

Pfft, who needs accuracy when it looks good?

Thanks dudes.

MASAKO · December 4th, 2011, 22:35

nothing fancy but you it sure shot well and look good. Thanks Illusion for the upper. Just in case somebody wonder about the scope, it's Millet DMS-1 Illumination with real steel Larue 1.93 AR mount. My leupold Mark 4 3x9.5x30 LR/T is on it way, not sure if it's stay on that upper or my remington.

ILLusion · December 5th, 2011, 13:03

The upper assembly looks fantastic on that build! Glad to see she's found a good home to take care of her.

trevor · December 5th, 2011, 16:51

love it Chris

damage · December 6th, 2011, 08:24

Nothing new. Trying to see which optic set up is better.

ILLusion · December 6th, 2011, 14:28

The third one! ... assuming its limitations and functionality works for you. I'm just saying it looks the most bad ass!

Karma_ · December 6th, 2011, 15:15

Third one completes the gun more.

lonesniper · December 6th, 2011, 23:50

I like the Comp and the short dot.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 17th, 2011, 02:12	#346
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	Width is largely irrelevant. It will fit any manufactured cell that is less that 1" The OD of a milspec buffer is 1.14", and the commercial is 1.17". ID is always the same for every buffer, it has to be that way. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

October 17th, 2011, 11:12	#347
Rookie Ab a.k.a. Kody_1 Trader rating Join Date: Apr 2007 Location: 51° 2′ 42″ N, 114° 3′ 26″ W	I modded one of Kev's old 15c batteries and it measures 21mm x 18mm x 106mm [IMG][/IMG] The flap of tape is to pull the battery back out of the tube. The balance plug fits into a recess in the back or the tube. [IMG][/IMG] I still am going to shorten the leads coming from the board another 10mm and that will straighten and keep the wires tight to the battery. __________________ AKA : Rookie, on a few other boards.

October 17th, 2011, 12:22	#348
Karma_ Trader rating Join Date: Feb 2008 Location: Calgary, AB	When I did one I shaved some of the end of the buffer tube out for the deans to sit in. It gave it more room and didn't ruin any of the structural integrity. It's snug but not a bad way to go. Looks good Greg. __________________ *The cost of being legit is high*

December 1st, 2011, 19:43	#349
Karma_ Trader rating Join Date: Feb 2008 Location: Calgary, AB	My 416 PTW. I am sooo in love. Just waiting for an AAC flash hider and a Crane stock, although I might keep the MOD stock. __________________ *The cost of being legit is high*

December 1st, 2011, 19:51	#350
MilanWG Perroz Designs Trader rating Join Date: Jul 2003 Location: Toronto, ON	Bad ass dude - nice job. __________________

December 1st, 2011, 20:22	#351
wey ferro Trader rating Join Date: Dec 2004	Looks decent but shoots like crap! __________________ www.ferroconcepts.com

December 1st, 2011, 20:39	#352
Beowulfe Trader rating Join Date: Apr 2007 Location: Calgary, AB	Looks great, Chris. __________________

December 1st, 2011, 21:27	#353
Karma_ Trader rating Join Date: Feb 2008 Location: Calgary, AB	Pfft, who needs accuracy when it looks good? Thanks dudes. __________________ *The cost of being legit is high*

December 4th, 2011, 22:35	#354
MASAKO Trader rating Join Date: Mar 2011 Location: Brossard, QC	nothing fancy but you it sure shot well and look good. Thanks Illusion for the upper. Just in case somebody wonder about the scope, it's Millet DMS-1 Illumination with real steel Larue 1.93 AR mount. My leupold Mark 4 3x9.5x30 LR/T is on it way, not sure if it's stay on that upper or my remington.

December 5th, 2011, 13:03	#355
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	The upper assembly looks fantastic on that build! Glad to see she's found a good home to take care of her. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

December 5th, 2011, 16:51	#356
trevor Trader rating Join Date: May 2006 Location: Red Deer	love it Chris

December 6th, 2011, 08:24	#357
damage Trader rating Join Date: Jan 2005 Location: Port Coquitlam, BC	Nothing new. Trying to see which optic set up is better. __________________ Team P.I.M.P. Vancouver BC -Guntech(PM or E-mail only)

December 6th, 2011, 14:28	#358
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	The third one! ... assuming its limitations and functionality works for you. I'm just saying it looks the most bad ass! __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

December 6th, 2011, 15:15	#359
Karma_ Trader rating Join Date: Feb 2008 Location: Calgary, AB	Third one completes the gun more. __________________ *The cost of being legit is high*

December 6th, 2011, 23:50	#360
lonesniper Trader rating Join Date: Jan 2010 Location: Maryland	I like the Comp and the short dot. __________________ My OPS are Blacker than yours... Give them nothing, But take from them.....Everything. ø¤º°`°º¤ø ,¸¸,ø¤º°`°º¤ø,¸¸, °º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º° °`°`°º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º? ?` °`° °º¤ø,¸¸,ø¤º°`°º¤ø,¸¸,ø¤º° ,¸¸,ø¤º°`°º¤ø,¸¸, ø¤º°`°º¤ø º°`°º

This is an PTW thread

Airsoft Media