.

[Styrak]

Originally Posted by ProbeJax

Wait, what? Ok, I'll try doing this tomorow. I haven't taken the mag out loaded in quite a while, so I could be wrong.

If you've handled any kind of airsoft magazine ever, you'd know that they don't empty into the gun all at once. The point other people were trying to make is that all the BB's do or do not FEED into the gun while firing.

[ProbeJax]

Originally Posted by Styrak

If you've handled any kind of airsoft magazine ever, you'd know that they don't empty into the gun all at once. The point other people were trying to make is that all the BB's do or do not FEED into the gun while firing.

I SAID that they don't empty into the gun at once.

[DOM]

I'm not sure what kind of measurements are you looking for... like just the w/h/t? or tech spec's? As I refuse to get up, you'll have to deal with mm as the measuring tape is the only thing I have with in hands reach.

276.5mm long 48mm wide at frount, and 55mm wide at the receiver end.
its about 25mm thick in the middle, but it varies.

What pray tell are you using mag in?

I just don't see it fitting in any other AEG :S

Oh and no all the BB's don't feed into the gun at once, you may fire a few then swap out for a fresh mag, then swap back to the other when you run out.

Just be sure you tip the gun upside down to empty out the few gravity-fed BB's when you change out a half used mag or you wont get the mag in and or damage the nozzle.

[Styrak]

Thanks for reiterating everything in this thread for us.

[DOM]

Just trying to clear things up