Mag g36 mags?

[Omi-san]

I got the King Arms G36 mags today.

They fit very tight in the CA G36. After sanding them a bit, it got better, but the mags still need to be pushed real hard to lock in place. The good side to this is that hey feel more solid on the rifle and don't wobble sideways like the CA mags.

The KA mags are hard to snap together, but again, they feel more solid than the stock ones and are probably less prone to accidentally detach. They can be snapped with CA mags.

The first 50 BBs are easy to load, but once you reach curve at the bottom of the mag where the spring goes back up, there is a lot of resistance. It feels like you are going to break the loading rod or the mag.

There is unfortunately a slight rattle coming from the BBs inside the mag. It's nothing close to an Hi-cap rattle, but still disappointing.

Overall, it's worth it for only $10 per mag.

[The Lettonian]

Originally Posted by Omi-san

I got the King Arms G36 mags today.

They fit very tight in the CA G36. After sanding them a bit, it got better, but the mags still need to be pushed real hard to lock in place. The good side to this is that hey feel more solid on the rifle and don't wobble sideways like the CA mags.

The KA mags are hard to snap together, but again, they feel more solid than the stock ones and are probably less prone to accidentally detach. They can be snapped with CA mags.

The first 50 BBs are easy to load, but once you reach curve at the bottom of the mag where the spring goes back up, there is a lot of resistance. It feels like you are going to break the loading rod or the mag.

There is unfortunately a slight rattle coming from the BBs inside the mag. It's nothing close to an Hi-cap rattle, but still disappointing.

Overall, it's worth it for only $10 per mag.

I got the box set as well and i've had a couple of issues with the mags.

1) Some of them were VERY stubborn about going into my TM G36C...I actually slam on the bottom of every mag not, just to be sure, and they're STILL tighter than...ok, I won't make that reference.

2) As mentioned above, filling them up is tough...I recently broke a speedloader loading one of them.

3) I get some double-stacking happening. I still don't know why. The BBs will randomly double stack, and then stop feeding properly. I changed mags every 20 shots or so when I played in Wasaga, and I never knew when I was out. Which was annoying. They'd also misfeed at the WORST times...

1) and 2) I can live with...as mentioned by Omi-san, the tight fit is good. Anyone have a solution for 3)?

[metallicaz83]

Are G36 mags and G36C mags the same? If not how do they differ?

[The Saint]

They are the same. There are no "G36C mags", there are only "G36 mags". Currently all (excluding crapsoft) G36s are based on Marui's original G36C, so they all have the same mag well specification. Even the STAR SL9 locaps are usable in all G36s.

[metallicaz83]

Ok thanks, so are most parts of the G36 and G36c the same?

[The Saint]

Yes.

[Brit ter]

Originally Posted by FNG_13

I got the box set as well and i've had a couple of issues with the mags.

1) Some of them were VERY stubborn about going into my TM G36C...I actually slam on the bottom of every mag not, just to be sure, and they're STILL tighter than...ok, I won't make that reference.

2) As mentioned above, filling them up is tough...I recently broke a speedloader loading one of them.

3) I get some double-stacking happening. I still don't know why. The BBs will randomly double stack, and then stop feeding properly. I changed mags every 20 shots or so when I played in Wasaga, and I never knew when I was out. Which was annoying. They'd also misfeed at the WORST times...

1) and 2) I can live with...as mentioned by Omi-san, the tight fit is good. Anyone have a solution for 3)?

I too am having the same probs with my KA 36 mags !

[The Saint]

Try a light application of silicon oil and then loading and reloading several mags of BBs to even and clear out the excess oil.

[Brit ter]

is this prob. with KA mags ,when they are new!

[Windows]

Originally Posted by FNG_13

I got the box set as well and i've had a couple of issues with the mags.

1) Some of them were VERY stubborn about going into my TM G36C...I actually slam on the bottom of every mag not, just to be sure, and they're STILL tighter than...ok, I won't make that reference.

2) As mentioned above, filling them up is tough...I recently broke a speedloader loading one of them.

3) I get some double-stacking happening. I still don't know why. The BBs will randomly double stack, and then stop feeding properly. I changed mags every 20 shots or so when I played in Wasaga, and I never knew when I was out. Which was annoying. They'd also misfeed at the WORST times...

1) and 2) I can live with...as mentioned by Omi-san, the tight fit is good. Anyone have a solution for 3)?

Same with mine. I had them running good if I lightly coated the amunition in silicone oil but quickly discovered that it stopped the hop up from working. Since then I have cleaned out the oil and the hop returned to normal.
I'd like to know if the KA with fake bullets have the same problem or not