another i cant find answers to (RIS RAILS)

[Jayhad]

Originally Posted by roughshadow

You need to learn to read my friend. Its not a want ad at all its asking for help identifing something. I can more then easaly import rails my self or even buy new localy.

come on man; clearly you can see that telling someone to learn to read when you yourself can't spell better then my cat is a little foolish.

Next time you post do everyone a favour and click the little check mark with ABC above it. It is right above the Smilies

[Dracheous]

Originally Posted by roughshadow

You need to learn to read my friend. Its not a want ad at all its asking for help identifing something. I can more then easaly import rails my self or even buy new localy.

You need to learn to spell, and write then.

If you can already source out the part you want, then what was the point to his HUGE waste of bandwidth?


You have not even stated WHICH gun you wish to mount this to but your own, I don't know about you but the rest of us sober people here don't read minds. The only hint to a rifle here is Gamz' informative post about FAMAS rail mods to mount a 203, which you did state you wanted ((The 203 part)).


So you can order the part, order it then, whats the point here? As in, just what the hell are you asking people? Where to get it? What to do with it?

And before you snap back at this one, realize that every post here has tried to have SOME informative info in it, but I guess all those reading skills you preach others to get have missed it.

[CDN_Stalker]

Anyoen seen this, it's hilarious!

YouTube - The Retarded Mosh Pit

[surebet]

Originally Posted by CDN_Stalker

Anyoen seen this, it's hilarious!

http://www.youtube.com/watch?v=Jdr9k1T-rSQ

lol, kinda like ASC, but on a good day...

[CDN_Stalker]

Originally Posted by surebet

lol, kinda like ASC, but on a good day...

Ya, see the retarded guy pointing at his retarded friend and doing the circular finger motion near his head to point out his friend is retarded? That is hilarious! We don't give mentally challenged people enough credit for intelligence, because even they know when their friends are acting like retards.

[roughshadow]

Originally Posted by Dracheous

You need to learn to spell, and write then.

If you can already source out the part you want, then what was the point to his HUGE waste of bandwidth?


You have not even stated WHICH gun you wish to mount this to but your own, I don't know about you but the rest of us sober people here don't read minds. The only hint to a rifle here is Gamz' informative post about FAMAS rail mods to mount a 203, which you did state you wanted ((The 203 part)).


So you can order the part, order it then, whats the point here? As in, just what the hell are you asking people? Where to get it? What to do with it?

And before you snap back at this one, realize that every post here has tried to have SOME informative info in it, but I guess all those reading skills you preach others to get have missed it.

regardless of what I plan to "mount" it on i just need the name of a rail that can accept most things.

And for all those saying I can't spell try correcting them with said spell check cause I use one. You won't find an error.

Is any one going to tell me the length of a vsr-10 rail or has this just become a flame the topic starter cause he supposedly cant spell. This shit is pissing me off.


As for the point it was to identify the "part" so I don't have to sit and spend probably 600 getting every rail part out there.

[surebet]

The question you asked was incredibly easy to ask (I have gun X and want to add X), but instead you ranted on and on, without giving people the basic information required to help you.

You type like you're drunk.

What the fuck do you expect from ASC? A hug?

[CDN_Stalker]

Originally Posted by surebet

You type like you're drunk.

I take offence to that comment!!!

BTW, I haven't said "*****!" in a long while.................... I'll wait.

[Dracheous]

Originally Posted by roughshadow

regardless of what I plan to "mount" it on i just need the name of a rail that can accept most things.

And for all those saying I can't spell try correcting them with said spell check cause I use one. You won't find an error.

Is any one going to tell me the length of a vsr-10 rail or has this just become a flame the topic starter cause he supposedly cant spell. This shit is pissing me off.


As for the point it was to identify the "part" so I don't have to sit and spend probably 600 getting every rail part out there.

You obviously missed it again, as I didn't JUST say you're spelling is bad, but your witting is as well. Where before this post have you asked for the length of the VSR-10? Why the hell does everyone else have to figure out what you're thinking?

Ah Good, you DO realize that there are different kinds of rails out there; perhaps you could also realize that the reason there are so many is because there are so many kinds of gun platforms to install them too.

People don't read your mind through this new fangled thing called the internet, so they're going to make attempts to help, being bitched at for trying doesn't make any of them want to do it in any sort of friendly way. And seriously, if people inquire for more information to help YOU what harm is going to be to YOU?

Originally Posted by surebet

What the fuck do you expect from ASC? A hug?

That's sig material.

Originally Posted by CDN_Stalker

I take offence to that comment!!!

BTW, I haven't said "*****!" in a long while.................... I'll wait.

You're coherent when you're drunk though, probably more so than sober, but since you're never "really" sober who's to tell.

[CDN_Stalker]

Originally Posted by Dracheous

You obviously missed it again, as I didn't JUST say you're spelling is bad, but your witting is as well. Where before this post have you asked for the length of the VSR-10? Why the hell does everyone else have to figure out what you're thinking?

Ah Good, you DO realize that there are different kinds of rails out there; perhaps you could also realize that the reason there are so many is because there are so many kinds of gun platforms to install them too.

People don't read your mind through this new fangled thing called the internet, so they're going to make attempts to help, being bitched at for trying doesn't make any of them want to do it in any sort of friendly way. And seriously, if people inquire for more information to help YOU what harm is going to be to YOU?








That's sig material.



You're coherent when you're drunk though, probably more so than sober, but since you're never "really" sober who's to tell.

Fair nuff, but do you have to post pics of Michael Moore at the Hollywood preview of his most recent movie 'Sicko'? That just turned me off my beer for the night!

[Pyro]

Originally Posted by roughshadow

And for all those saying I can't spell try correcting them with said spell check cause I use one. You won't find an error.

Hmmmm . . . . .let me see

Originally Posted by roughshadow

I am looking for a rail that you can generally mount just about anything to. Ihat's 12 inches long with no mounts on the bottom. The closer the better.


Problem is I don't know enough hands on experience with all the guns to say what gun my rails got to be butchered from. or wether its top or bottom or what.


This major mod is giving one problem after another in finding the right parts.


(where the holes are in the rail don't mater doesnt even matter if it has the holes the rails being modified any ways)

I have been searching 12 hours(collectivly not straight) now.

Originally Posted by roughshadow

I am looking for a 12 inch rail to bucher. That I can mount an m203 or taclight or lasers or what ever else I can think up.

And I already read that thread threw and threw. I have the mountings for the rails ready. (and the p-arts for the new powerpack) I just need the rail its self. problem is I dont know what rail is 12 or even 6 inches long(yes a 6 inch will do but I still need the 12)

And its not nesaraly for the famas. I have a g36 I am buchering to make something no ones seen yet.

Originally Posted by roughshadow

Thank you and yes endymion has the idea

I will remeber your sugestion for the next part I hunt if I cant find all nessary

info.

Originally Posted by roughshadow

unless you have something helpfull to say please dont clutter my threads with junk that is meaningless thank you

cc pms of dontask and pip

Originally Posted by roughshadow

You need to learn to read my friend. Its not a want ad at all its asking for help identifing something. I can more then easaly import rails my self or even buy new localy.

And that's just from page one of this thread.

[surebet]

Originally Posted by CDN_Stalker

I take offence to that comment!!!

BTW, I haven't said "*****!" in a long while.................... I'll wait.

Yeah, but you're forgiven for being a drunk since you're 1337 enough to carry 2 sniper riffles at a time!

[roughshadow]

Can Some One Please Tell me the lenth of the vsr-10 rail

[Colin_S]

According to this the VSR rail is 13.7cm (dunno if that's the same one others are talking about). These two G36C long rails are 15.4cm each and two are just over 12" long. May work depending on what you want to do.

[roughshadow]

Thank you collin