|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
July 29th, 2017, 13:31 | #16 | |
Quote:
__________________
WREAK HAVOC |
||
July 29th, 2017, 14:20 | #17 |
Squid Porn Superstar, I love the tentacles!
|
If you are drawing 70A, it means either your motor is fucked, your shimming is fucked, or both.
The braking wire is there for the purpose of motor braking. It is there to connect the poles of the motor to a circuit independent of the battery. |
July 29th, 2017, 15:13 | #18 |
I had to switch back to my old wiring setup for now and checked the shimming, it stand perfectly fine with no up and down movement. The motor seems to be fine, but pinion gear is somewhat loose. Still works fine. I can attach a photo of the wire afterwards and any pics needed as it is in it's original box waiting on a warranty claim.
__________________
WREAK HAVOC |
|
July 29th, 2017, 15:58 | #19 |
Squid Porn Superstar, I love the tentacles!
|
Run the motor by itself and see what the amp draw is under no load. SHS HT should be around 3A. If it is under 5A or so, the motor is fine and your shimming is off.
|
July 29th, 2017, 17:00 | #20 |
I would do this, but I do not want to risk using the get again since the brake wire's insulation is melted lol
__________________
WREAK HAVOC |
|
July 29th, 2017, 22:01 | #21 | |
Quote:
Been using one in my m4 for a few months and it's been flawless also put it up against a few spectre's and it out performed them aswell. Sent from my SM-G930W8 using Tapatalk |
||
July 29th, 2017, 22:07 | #22 | |
Quote:
haha |
||
July 30th, 2017, 14:41 | #23 |
Squid Porn Superstar, I love the tentacles!
|
|
July 30th, 2017, 16:33 | #24 |
Privateer Airsoft
|
Also, what gearbox shell are you using? Did you check if the piston moves freely when the gearbox is screwed together?
__________________
I change primaries like other people change socks. |
July 30th, 2017, 23:54 | #25 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
I'm curious; how exactly does a mosfet "outperform" another mosfet?
Were you watching the amp loading with an oscilloscope? Or are you just comparing ROF and trigger response which actually has nothing to do with the mosfet's actual performance? Last edited by ThunderCactus; July 31st, 2017 at 00:00.. |
July 31st, 2017, 19:36 | #26 |
"bb bukakke" KING!
|
did you hear? gate titans give you a hand job and a rim job at the same time.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
July 31st, 2017, 23:44 | #27 |
|
Bookmarks |
|
|