VFC 416 Mid cap mags needed… Which brand?

[gogojuice]

So in the picture I posted #14…

I should taper the yellow marked area?

As for the red outlined area… is that a ok that it is all on one plain?

[lurkingknight]

that is correct.

The top surface shouldn't matter if the tube sticks up above the chunk where the keeper sits into.

[gogojuice]

So…. an update. I tried shaving the bb retainer down. Still has problems with inconsistent feeding

I have also tried…
1) adding bb's to the bottom of the mag to increase spring tension (did not work)
2) removing the black plastic foller (did not work)
3) adding silicone to the inside of the mag (did not work)
4) putting velcro to the inside of the mag well for a tighter fit (did not work)

HOWEVER….

The stock VFC high cap fires every single time. I was beginning to think perhaps it was the gun until I put the high cap in.

So…I'm wondering if I should just bite the bullet and by VFC mid cap mags?
I did a search and ironically I couldn't find anyone in Canada that has them. Do you guys know of anyone that may have them for sale?

Thanks for your time

[Kayn]

I have a we katana, and tho not the same as your 416 i have also had consistency problems with the king arms mags. The Spring is good they just dont feed. My G&G mags work flawlessly as well as the one PTS PMAG that i own. It may be just fact that the mag does not fit within the tolerances of your particular make of aeg.

[JosephSSmith]

Classic Army feeds are better option to use it has 300 round capacity. I use it and it is good.