G3SD6 - PS I'm alive :D

Amos · October 26th, 2016, 04:00

Quote:

Originally Posted by pestobanana

Any V2 BTC MOSFET will be great. If those are too expensive or too difficult for you to procure, buy or make a 3034 based FET using a micro TVS so that you can fit it inside the gearbox.

I've been thinking about giving the Gate TITAN a go when it comes out...

I don't think there's a BTC carrier in Japan... and all of the shops I'd like to buy from in Canada are sold out

pestobanana · October 26th, 2016, 05:44

Quote:

Originally Posted by Amos

I've been thinking about giving the Gate TITAN a go when it comes out...

I don't think there's a BTC carrier in Japan... and all of the shops I'd like to buy from in Canada are sold out

Gate doesn't exactly have a good reputation. My home brew FETs have lower failure rates than their products.

http://www.torontoairsoft.com/BTC-Ai...-2_p_4550.html

Amos · October 26th, 2016, 05:58

Quote:

Originally Posted by pestobanana

Gate doesn't exactly have a good reputation. My home brew FETs have lower failure rates than their products.

http://www.torontoairsoft.com/BTC-Ai...-2_p_4550.html

"Shipping Method
There is no shipping option for the address you entered. Please go back and check the address."

Hurrrnng

cetane · October 26th, 2016, 09:55

You could try one of the jefftron fets... similar features to the btc offering, and coming out of eu so you might find it easier to get. I don't know about reliability of them though.

Cliffradical · October 26th, 2016, 12:52

Quote:

Originally Posted by pestobanana

...really fucking dumb...

Yes, and?
For sharpshooters in urban operations etc it's plausible something similar was attempted. It was the 70s after all. Lots of party drugs and nowhere near the suppressor know-how that we have today.
Tons and tons of cool and kooky shit never goes into full scale production.

Riley: It's very cool and I'd put it on a gun wall just to see how many people notice.

cetane · October 26th, 2016, 13:35

Plausible if setup for something like this:

http://www.thefirearmblog.com/blog/2...ge-375-raptor/

Amos · October 27th, 2016, 09:58

Finished for now... pretty much solidly Prometheus internals. Replaced the garbo CA motor with a TM EG1000 and got a TM hop-up unit.

Only thing it needs now is a FET! From my very basic testing (Maximum range I have without heading out of the city to test) It's getting a very consistent 150 feet. At range I'm able to hit an A4 piece of paper 8/10 times!

Cliffradical · October 27th, 2016, 21:16

So I have an oldass CA 33E and a Cyma SD6. You've inspired me to mush the two together because the only thing more hilarious than this thing you've made is a 9mm with a 14" (?) Rifle barrel.

...and I get to have a 33SD as well which may even be more plausible than your 7.62 Murderator.
It's called an 'HK Muderator' now fyi.

Amos · October 28th, 2016, 00:39

Quote:

Originally Posted by Cliffradical

So I have an oldass CA 33E and a Cyma SD6. You've inspired me to mush the two together because the only thing more hilarious than this thing you've made is a 9mm with a 14" (?) Rifle barrel.

...and I get to have a 33SD as well which may even be more plausible than your 7.62 Murderator.
It's called an 'HK Muderator' now fyi.

Not quite sure on the front end of the 33E, but for me it was a matter of filing and persuading things to line up before driving bolts through holes.

I really, really want to use this... For some reason decent G3 midcaps are really hard to find... Anyone know where the packs of 130 round KA metal mags went!?

Amos · October 28th, 2016, 21:26

Hrm. I contacted Toronto Airsoft about the shipping the BTC fet and was met with a stiff "We don't ship internationally" ... Shame the other Canadian retailers that are willing to work with me are sold out

Drakker · October 28th, 2016, 22:38

Quote:

Originally Posted by Amos

Hrm. I contacted Toronto Airsoft about the shipping the BTC fet and was met with a stiff "We don't ship internationally" ... Shame the other Canadian retailers that are willing to work with me are sold out :(

Get someone in Canada to pick one up for you and ship it to you. I'd do it, but I'm not in Toronto. ;)

Datawraith · October 29th, 2016, 00:42

I seem to recall something about EOD Steve becoming a BTC dealer. Maybe hit him up?

pestobanana · October 29th, 2016, 01:23

If you're actually dead set on getting one, I can act as middleman next time I'm at Toronto Airsoft.

Amos · October 29th, 2016, 01:58

Quote:

Originally Posted by pestobanana

If you're actually dead set on getting one, I can act as middleman next time I'm at Toronto Airsoft.

I'll do a little bit of browsing to try and find one on this side of the world right now, but I'll keep that in mind if I end up wanting to get one from T.Airsoft

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 26th, 2016, 09:55	#19
cetane Trader rating Join Date: Jun 2010 Location: Markham & Stouffville - Ontario - Canada	You could try one of the jefftron fets... similar features to the btc offering, and coming out of eu so you might find it easier to get. I don't know about reliability of them though. __________________ Looking to get age verified in York region? Click link...

October 26th, 2016, 13:35	#21
cetane Trader rating Join Date: Jun 2010 Location: Markham & Stouffville - Ontario - Canada	Plausible if setup for something like this: http://www.thefirearmblog.com/blog/2...ge-375-raptor/ __________________ Looking to get age verified in York region? Click link...

October 27th, 2016, 09:58	#22
Amos Trader rating Join Date: Aug 2006 Location: Tokushima, Japan	Finished for now... pretty much solidly Prometheus internals. Replaced the garbo CA motor with a TM EG1000 and got a TM hop-up unit. Only thing it needs now is a FET! From my very basic testing (Maximum range I have without heading out of the city to test) It's getting a very consistent 150 feet. At range I'm able to hit an A4 piece of paper 8/10 times! __________________ Custom Builds: FA3674U Krinkov G3SD6

October 27th, 2016, 21:16	#23
Cliffradical butthurt for not having a user title Trader rating Join Date: Jun 2010 Location: Winnipeg	So I have an oldass CA 33E and a Cyma SD6. You've inspired me to mush the two together because the only thing more hilarious than this thing you've made is a 9mm with a 14" (?) Rifle barrel. ...and I get to have a 33SD as well which may even be more plausible than your 7.62 Murderator. It's called an 'HK Muderator' now fyi.

October 28th, 2016, 21:26	#25
Amos Trader rating Join Date: Aug 2006 Location: Tokushima, Japan	Hrm. I contacted Toronto Airsoft about the shipping the BTC fet and was met with a stiff "We don't ship internationally" ... Shame the other Canadian retailers that are willing to work with me are sold out __________________ Custom Builds: FA3674U Krinkov G3SD6

October 29th, 2016, 00:42	#27
Datawraith Trader rating Join Date: Oct 2014 Location: Markham	I seem to recall something about EOD Steve becoming a BTC dealer. Maybe hit him up?

October 29th, 2016, 01:23	#28
pestobanana Squid Porn Superstar, I love the tentacles! Trader rating Join Date: Nov 2008 Location: Richmond Hill and Waterloo, Ontario	If you're actually dead set on getting one, I can act as middleman next time I'm at Toronto Airsoft.

G3SD6 - PS I'm alive :D

Airsoft Media