|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 15th, 2007, 19:29
|
#16 |
|
Official ASC Bladesmith
|
Dyord, I use 0.30g BB in all my GBBs (KSC MK23 and G19s), so stop whining about cost. Lol, I've actually used up to 0.43g in them before as well.
Donster, get a Prometheus 110SP spring, I have one in my MP5 and it shoots 365fps. If you add a tightbore and a bearing spring guide, that'll put you close to 390fps. Avoid the PDI springs, they will reduce your battery life as well as possible damage your internals (if a V2 merchbox, itll be destroyed within a few thousand shots). |
|
|
|
December 16th, 2007, 13:27
|
#17 |
|
Just had a game today.. grouping is still inconsistent using .28's.. But didn't see the difference from .25's. Now I'm planning to buy a tight barrel next week.
btw, may I ask how many fps drop does .28's have from the standard .2's? Because my SP160 setup just clocked 405fps.. I found it very frustrating because I was expecting 500+
__________________
MORE FPS :banghead: |
|
|
|
|
|
December 16th, 2007, 13:45
|
#18 |
|
Stalker thanks for the info. i will be buying a TM M14 soon, so if you have any advice for that, that would be sweet. i was hoping to have it shoot at least around 350ish with .28-.30s.
|
|
|
|
|
December 16th, 2007, 13:55
|
#19 |
|
does anyone know what's the bore size of a stock TM AUG barrel? I'm planning to buy CA 6.04, 510mm barrel.
__________________
MORE FPS :banghead: |
|
|
|
|
|
December 16th, 2007, 14:08
|
#20 |
|
|
i think its around 6.08-6.10, or at least that is what i heard stock TM guns were. Get a prometheus barrel. i have heard nothing bad about them; only good.
|
|
|
|
|
December 16th, 2007, 22:43
|
#21 |
|
stock TM innerbarrels are 6.08.
if you're on a budget get Systema tightbores |
|
|
|
|
December 17th, 2007, 10:44
|
#22 |
|
Official ASC Bladesmith
|
Velocity drop with .28g is around 50-60fps. I use a general rul.e of thumb, I've seen the results from a few different guns, there is roughly 100fps difference between .20g BBs and .36g BBs, so .28g being in the middle......... 50fps. 0.25g tend to be about 30-40fps lower than 0.20g.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
