|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
December 2nd, 2006, 16:16 | #1 |
mp5 problem
my ics mp5 not feeding. i have tried different mags and the hop up.. any suggestions. thanxs.
|
|
December 2nd, 2006, 18:44 | #2 |
Official ASC Bladesmith
|
More info would be good, has it been apart recently or it just started out of the blue for no reason. Until then, put a drop or two of silicon oil into your mag feed tube, and dry fire it a few times. Then load a mag in and see if it feeds then. Often poeple experience feeding issues when they don't keep the hop up lubed properly, the BBs have a hard time pressing through the breech and jam/plug up.
|
December 2nd, 2006, 21:45 | #3 |
it just happen. never been open. i put some silicon oil in and still nothing could it be the hop up or anything else? thanxs
|
|
December 2nd, 2006, 22:04 | #4 |
empty it and hold it upside down and check to see if the nozzle is moving back and forth.
|
|
December 2nd, 2006, 23:56 | #5 |
Official ASC Bladesmith
|
While wearing safety glasses of goggles of course! I got the pics to prove that threat.
|
|
Bookmarks |
|
|