Large cell 8.4v large cell for AUG/M203??

Hortons Heros · August 4th, 2006, 16:05

Is there a large cell 8.4v battery that would fit in an AUG? Maybe with some custom work?

EDIT- this is a whole question to itself. I have seen that the TM M203 can be attached to the AUG on the redwolf site. I am stilll waiting for a reply from them. I am wondering if anyone knows where to get the parts or plans to do this project?

Tankdude · August 6th, 2006, 00:34

You need to get 6 cells in there. The gun will work fine on 7.2 volts as long as the mah are high (and pending upgrades)... like 3600 mah for example.

I think you can cram them in.. say 3-4 in the back, remove part of the plate that holds the mech box and you can for sure get 4 in there. Maybe remove some of the motor cage like an AK's cage. And next to the arm that moves back to the tigger, maybe on either side. (dremal)

I remember seeing a picture of someone craming in the batteries.

I ran 9.6 2300 mah and torque gears and had good endurance. A stock spring and it would just purr, a pdi 140 and it had a good chug to it.

Option B (ducks behind keyboard) Lipo. A 2 cell hi drain (read, good Q) 3300 mah, be about 70$ (guessing). The 2 cell is 7.4 volts and I know 7.2 will turn a stock gun no problem. If I ever got an AUG/P90 again I would go lipo.

Each has there own problem and benifits. If you pull it off I would love to see it.

Hortons Heros · August 6th, 2006, 01:52

thanks Tank.. I have a 7.2 I am going to try and get in there. I'm trying to kick the full auto habbit so this should help.

TOTALLY DIFFERENT TOPIC. but I know some aug users will see this.

How do I remover the outer barrel and the aluminum barrel sheath thingy from the AUG?

Tankdude · August 6th, 2006, 16:19

1. Remove fore grip by pushing the pin. Remeber the spring as it will go pop.
2. unscrew the grub screw under the grip and the metal barrel will pop right out.
3. remove two screws holding the plastic barrel and collar together and then the two screws holding the plastic barrel and hop up together.

After that it should be easy.

Hortons Heros · August 6th, 2006, 16:37

you the man tank...I hope your a man.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 4th, 2006, 16:05	#1
Hortons Heros Trader rating Join Date: Jan 2005 Location: Prince George BC	Large cell 8.4v large cell for AUG/M203?? Is there a large cell 8.4v battery that would fit in an AUG? Maybe with some custom work? EDIT- this is a whole question to itself. I have seen that the TM M203 can be attached to the AUG on the redwolf site. I am stilll waiting for a reply from them. I am wondering if anyone knows where to get the parts or plans to do this project? __________________ age verifier for Prince George, Mackenzie, Quesnel, Fort st James and northren BC http://pgairsoft.goodforum.net/index.forum

August 6th, 2006, 01:52	#3
Hortons Heros Trader rating Join Date: Jan 2005 Location: Prince George BC	thanks Tank.. I have a 7.2 I am going to try and get in there. I'm trying to kick the full auto habbit so this should help. TOTALLY DIFFERENT TOPIC. but I know some aug users will see this. How do I remover the outer barrel and the aluminum barrel sheath thingy from the AUG? __________________ age verifier for Prince George, Mackenzie, Quesnel, Fort st James and northren BC http://pgairsoft.goodforum.net/index.forum

August 6th, 2006, 16:37	#5
Hortons Heros Trader rating Join Date: Jan 2005 Location: Prince George BC	you the man tank...I hope your a man. __________________ age verifier for Prince George, Mackenzie, Quesnel, Fort st James and northren BC http://pgairsoft.goodforum.net/index.forum

August 6th, 2006, 00:34	#2
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	You need to get 6 cells in there. The gun will work fine on 7.2 volts as long as the mah are high (and pending upgrades)... like 3600 mah for example. I think you can cram them in.. say 3-4 in the back, remove part of the plate that holds the mech box and you can for sure get 4 in there. Maybe remove some of the motor cage like an AK's cage. And next to the arm that moves back to the tigger, maybe on either side. (dremal) I remember seeing a picture of someone craming in the batteries. I ran 9.6 2300 mah and torque gears and had good endurance. A stock spring and it would just purr, a pdi 140 and it had a good chug to it. Option B (ducks behind keyboard) Lipo. A 2 cell hi drain (read, good Q) 3300 mah, be about 70$ (guessing). The 2 cell is 7.4 volts and I know 7.2 will turn a stock gun no problem. If I ever got an AUG/P90 again I would go lipo. Each has there own problem and benifits. If you pull it off I would love to see it.

August 6th, 2006, 16:19	#4
Tankdude Trader rating Join Date: Jan 2005 Location: East Coast, New Brunswick	1. Remove fore grip by pushing the pin. Remeber the spring as it will go pop. 2. unscrew the grub screw under the grip and the metal barrel will pop right out. 3. remove two screws holding the plastic barrel and collar together and then the two screws holding the plastic barrel and hop up together. After that it should be easy.

Large cell 8.4v large cell for AUG/M203??

Upgrades & Modifications