|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 13th, 2006, 15:37
|
#1 |
|
Battery voltage for upgraded AEG
I have a P90 TR And i am purchasing this upgrade.
* Systema m120 Spring * Systema Metal Bushings * Systema Standard Ratio Flat Gears * Guarder Polycarb Piston * Polycarb Piston Head with Bearing * Spring Guide Rod with Bearing * Professional Installation 415Fps I want to know if i would be able to get away with using a voltage higher than 9.6 on my battery without breaking my gun. |
|
|
|
|
June 13th, 2006, 16:37
|
#2 |
|
Official ASC Bladesmith
|
9.6 will be totally fine. Higher voltage you run the increased risk of fragging your mechbox guts sooner.
|
|
|
|
|
June 13th, 2006, 17:13
|
#3 | ||
|
If you have to order pre-upgraded guns from Hong Kong because you can't do your own upgrades, why mess around even more by fucking with the voltage?
People gotta remember that these guns (the motors, in particular) were designed to run on 8.4 volts. Yeah, you can go higher, but it WILL damage your motor, no question. Technically, I can drive my Volvo wagon 120 mph.....but I don't, because the car wasn't designed for that and it would most likely break if I tried to do it continuously. A wise man once said: "Just because you can, doesn't mean you should." Think on that for a bit.
__________________
Quote:
Quote:
|
||
|
|
|
|
June 14th, 2006, 03:39
|
#4 |
|
AMEN to that
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
