|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 26th, 2018, 21:55
|
#16 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Specifically because they're more FANCY than useful
Angel custom doesn't sell parts because they're good, they sell them because they LOOK good and they're cheap. And for all the love people have of prowin chambers, I find they're better at causing new problems than fixing old problems that never existed in the first place (Most people upgrade due to accuracy problems which are rubber related, not chamber related). |
|
|
|
June 26th, 2018, 23:18
|
#17 |
|
They're advertised as cnc one piece hop ups which allegedly reduces air loss and improves sealing. What they don't tell you is that they're off spec POS that doesn't play well with the clone brands.
I had a king arms p90 that had a brass barrel refuse to fit in a prowin chamber because the hop up rubber was too thick. It was literally flipping inside out when I was trying to put it in. When I added some oil on the outside to help it slide, all the product was squeegee'd out of the hop up unit because it was so tight. I was grateful it didn't lose fps or cause misfeeds but it was the worst couple of greasy hours in my life. |
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
