PDI V Trigger and/or PDI cylinder set issue

redberets44 · July 26th, 2016, 23:37

So I recently got a WELL L96 in a trade and it has a few upgrades such as a PDI V trigger, a PDI cylinder set, an R hopped barrel, and an action army hop up chamber.

Anyways I believe there is an issue with the trigger or cylinder sets because 6/10 times when I pull the trigger nothing happens, I either have to tap it a bunch of times hoping it would fire or tap it once randomly. It locks back every single time though. Also there is no safety lever, I'm not sure if that's relevant.

ThunderCactus · July 26th, 2016, 23:46

Are you sure it's a V-trigger?

ShelledPants · July 27th, 2016, 02:08

This could be when the slot of the cylinder rides the sear and causes it to latch but then lock up. I had a similar issue with mine which I remedied by taking a file to the cylinder slot.

NOTE: I have a Mag Cylinder and a Action Army Zero Trigger. But the symptoms are the same.

Jamroxorz · July 27th, 2016, 02:29

Try loosening the screw near the trigger guard a bit.

redberets44 · July 27th, 2016, 19:16

Quote:

Originally Posted by ShelledPants

This could be when the slot of the cylinder rides the sear and causes it to latch but then lock up. I had a similar issue with mine which I remedied by taking a file to the cylinder slot.

NOTE: I have a Mag Cylinder and a Action Army Zero Trigger. But the symptoms are the same.

which area of the cylinder slot?

redberets44 · July 27th, 2016, 19:22

Ok I think I found the problem, the outer barrel turns and the cylinder set turns with it. Any idea how to stop this?

chaz · July 27th, 2016, 22:30

loctite?

redberets44 · July 28th, 2016, 18:31

well turns out that wasn't the issue, I did find out how to tighten the outer barrel though

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 26th, 2016, 23:37	#1
redberets44 Trader rating Join Date: Jan 2016 Location: gulag	PDI V Trigger and/or PDI cylinder set issue So I recently got a WELL L96 in a trade and it has a few upgrades such as a PDI V trigger, a PDI cylinder set, an R hopped barrel, and an action army hop up chamber. Anyways I believe there is an issue with the trigger or cylinder sets because 6/10 times when I pull the trigger nothing happens, I either have to tap it a bunch of times hoping it would fire or tap it once randomly. It locks back every single time though. Also there is no safety lever, I'm not sure if that's relevant.

July 27th, 2016, 02:08	#3
ShelledPants Trader rating Join Date: Feb 2008 Location: Toronto, On	This could be when the slot of the cylinder rides the sear and causes it to latch but then lock up. I had a similar issue with mine which I remedied by taking a file to the cylinder slot. NOTE: I have a Mag Cylinder and a Action Army Zero Trigger. But the symptoms are the same. __________________ Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur.

July 27th, 2016, 02:29	#4
Jamroxorz Jamroz Trader rating Join Date: Aug 2011 Location: Brampton Ontario	Try loosening the screw near the trigger guard a bit. __________________ ______________________________________ BA Certified Level 2

July 26th, 2016, 23:46	#2
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Are you sure it's a V-trigger?

July 27th, 2016, 19:22	#6
redberets44 Trader rating Join Date: Jan 2016 Location: gulag	Ok I think I found the problem, the outer barrel turns and the cylinder set turns with it. Any idea how to stop this?

July 27th, 2016, 22:30	#7
chaz Trader rating Join Date: Jan 2006 Location: Ajax	loctite?

July 28th, 2016, 18:31	#8
redberets44 Trader rating Join Date: Jan 2016 Location: gulag	well turns out that wasn't the issue, I did find out how to tighten the outer barrel though

PDI V Trigger and/or PDI cylinder set issue

Doctor's Corner