Hbar ~update~WITH pictures omg

[Shinjin_MC]

ohhh
all that diddling with that squarish metal bit and i missed that
heh heh
thanks

[willy]

might i just ask
why is this a benifit from other inner barrels?
i am not formiliar with HBAR

[Shinjin_MC]

its not an inner barrel
its an outer barrel
which is longer than the stock inner barrel
its quite good too...a little bit of inner barrel wobble since its not EXACTLY like the marui specs, but nothing a little bit o taping wont fix

http://world.guns.ru/machine/mg21-e.htm

[Lisa]

Ok, got mine, and I was pleasently surprised. It's still pleanty long, with the flash hider the barrel will take a 650mm extended psg1 inner barrel. which means that you need a bore up kit too if you go that route (not required if you stay with the stock inner barrel, but why would you?)

The barrel doesn't weigh too much but it's not flimsy either, I beleive it's strong enough to have a bipod clamped on the end of it. I plan on putting a harris bipod on it if I find one at a decent price.

Because it's a prototype I do need to turn the end down and then put a 14mm-1 die to it so I can put my old flash hider on it (I know it's not 100% authentic, but I care more about how it looks to me not some chair softer). Of course you could put a silencer on instead. It's a work in progress.

This gives us some extra possibilities here. The aug being so easy to take down (the barrel comes off so easily as described above and the mechbox is hidden behind 2 screws) it would be easy to run 2 setups just by having 2 mech boxes, 2 inner barrels, the extended hbar barrel and your original barrel, should take all of 5-10 minutes to swap.

Thanks TankDude

[Shinjin_MC]

that scope looks quite familar
wouldnt be a barska would it lisa?

[Lisa]

Originally Posted by Shinjin_MC

that scope looks quite familar
wouldnt be a barska would it lisa?

It would, you may have seen the link for it in the accessories classifieds.

[Nocturnal]

very very sexy. i would buy one if i did not already have an FF Phantom Kit. =)

i would think this HBAR is lighter than anyone with a phantom kit for an extended psg1 inner barrel.

is it nice and light in the front section lisa?

[Lisa]

It hasn't changed the weight much at all... I didn't weight it but in my hands the hbar barrel was comparable to the aug standard barrel, now when I toss on the bipod... that will be a different story.

[made Man]

Now makes us an affordable Phantom plz

[Tankdude]

Done.

Directions: Get a 3 foot length of black abs pipe and a roll of duct tape.

[made Man]

My AUG already looks like it's been in a few african conflicts... duct tape and piping wouldnt exactly help the problem