Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Information Center > Reviews
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Source Hydration Carrier (Flecktarn) and 3l Bladder Review

:

Reviews

Reply
 
Thread Tools
Old April 28th, 2014, 11:44   #16
docholiday
docholidayy
 
docholiday's Avatar
 
Join Date: Feb 2012
Location: Toronto
Quote:
Originally Posted by Azathoth View Post
Got my carrier from source shortly after the rider (lo-profile) was released. It's basically falling apart. It's certainly not sewn to the same standards as milspec gear like LBT, HSGI etc
Not sure about the specific item you got from Source, but the pack mentioned above is "milspec" used it in the military and it held up just fine to the abuse.
docholiday is offline   Reply With Quote
Old April 28th, 2014, 13:26   #17
w1lp33
 
Join Date: Sep 2010
Location: Sarnia, Ontario
My source rider has been to every airsoft game and Milsim event I've attended in the last 2 years. It's also gone through 4 Tough Mudder events, and aside from being somewhat faded/dirty, is in excellent condition. I've beat the shit out of that pack, and it's still going strong.
w1lp33 is offline   Reply With Quote
Old April 28th, 2014, 21:08   #18
Ricochet
How much sand CAN you fit in your vagina!?
 
Join Date: Feb 2008
Location: North Delta, BC (Greater Vancouver)
I just got the Razor Hydration System by Source, and it's amazing. Here's a short review I did.

So anyways, here is the item I found which is a huge win; the Razor Hydration System, by Source. If anyone has ever attended an endurance game they'll tell you, the worst moment is when you refill your bladder and then re-don vest or rig. You're tired, you're sore, your fatigued, and now you've just added pounds to your load-out. I myself ran a 3L bladder my entire airsoft carrier, as I go through a lot of water, this can be heavy. I carried it in a large, backpack style, multicam pouch on my back by Condor, or maybe Voodoo, I can't exactly remember. Anyways, this pouch had tons of room, so I'd often carry meals, my loading rod, and a warm layer inside. It did the job, but it was heavy, unbalanced, and flopped around while I moved. When I started investigating new options I found a lot of new tech available. Many outdoor/sport companies have started making military or tactical style products, from eyewear, to footwear, to hydration systems. Although this isn't new, it is way more common. A few of our guys have found some pretty awesome products such as the Razorback, and many have gone to smaller 2.5 or even 2 liter setups to save weight and size. My philosophy, I can put 1 or 2 liters in a 3 liter pack for shorter skirmishes, but I can't put 3 liters in a 2 liter pack. I looked at several types and designs, but many of the 3 liter systems were not what I'd call slimming, although they had better comfort and weight distribution. I was investigating a system called "Dagger" by Source when I was dissapointed to find out that it was discontinued. However, Source has engineered a newer system call "Razor" as a slim tactical hydration system. There are a few Source retailers in Canada, but I ordered mine straight from Source in the US. With shipping, the total was around $95.00 USD. With few relative reviews online, I was still fairly hopeful as Source was known for high quality products.

On to the Razor itself. The pouch is made very well, but has some odd features. First you'll notice that it's quite wide, this is actually a benefit, as the weight is very well distributed. It does however cover the back of my Blackhawk STRIKE PC, which isn't a small carrier, but that's okay, and I'll cover why here soon. Also I'll note that my PC isn't molle strapped to the top, so it is sitting a little low, but whatever, that's my carrier not the pack.

Another feature is the full molle straps in a subdued tan rather than multicam. Not a huge deal, but they are perfectly sewn, and are strong while being incredible easy to weave through. This actually will add to the benefit of its overall width, which I'm still going to explain later.

On the reverse side the molle is in free floating bands instead of columns. This means that their is no sewn dividers along each band, and two permanantly attached molle straps sewn to the top to weave down through. I thought this was goofy, but it actually benefits or well. Believe it or not it does not shift around whatsoever, as it actually helps hold it tight, and allows for versatile positioning. I do wish however that the straps were a little further apart though.

On to the benefit of the width beyond weight dispersal. The free floating molle bands allow for additional straps or malice clips to be placed to help mold this pack right to your rig. As you can see it is already very slim, but if the edges were strapped as well, you can imagine that it would fit like a chubby panel, instead of a pack style pouch. The other benefit of the width now, is that it is so secure and slim, you could attach an additional pack or pouches on its exterior without throwing of the balance, or creating wobble.

Over all, this is very slimming compared to almost all hydration systems, especially 3 liter ones. Beyond that, you'll be pleased to know that you can barely feel the overall weight, even surprisingly so.

As for the hydration portion of this system, there are a few great benefits. First off the drinking valve is handy, it has a full cover cap attached, as well as the pull open drinking system. Also, all of the connections are well made, and quick release. This makes it easy for cleaning, and or running it through/weaving it through your gear.

The hose cover is a woven fabric, and is extremely durable. So not only would it protect the hose from scratches and abrasions, but it would likely survive a strike or getting caught on something. It would likely repel even slightly sharp objects.

The bladder is an odd shape, but fits securely into the pack, and feels comfortable against your back. But here's the best feature; little to no water movement. In fact it almost doesn't slosh whatsoever, which is amazing.

Overall, this is a very cool system. The only test is its durability long term, but I don't imagine it'll be an issue. It is definately built more robust than any of my other hydration systems, and seems to have tech and development in all of the right places.

Here's an interesting update. I missed these little clips on the side. Once you mount it, you can snap it down tight to your rig along the edges decreasing its profile.

PROS:
- effective weight distribution allowing for additional equipment
- very slimming while holding a full 3 liters of water
- no water movement helping with long term balance and fatigue
- comfortable in all ways to wear

CONS:
- "May" not be versatile to all load-out styles due to sheer width
- I wish I had a better rig to test this on
Attached Images
File Type: jpg image.jpg (192.7 KB, 5 views)
__________________
I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...
Ricochet is offline   Reply With Quote
Old April 28th, 2014, 21:09   #19
Ricochet
How much sand CAN you fit in your vagina!?
 
Join Date: Feb 2008
Location: North Delta, BC (Greater Vancouver)
One more pic!
Attached Images
File Type: jpg image.jpg (127.4 KB, 8 views)
__________________
I have developed a new sport called Airhard. Pretty much the same as Airsoft, except you have to maintain an erection...
Ricochet is offline   Reply With Quote
Old May 4th, 2014, 22:36   #20
docholiday
docholidayy
 
docholiday's Avatar
 
Join Date: Feb 2012
Location: Toronto
Solid review, very interesting!
docholiday is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Reviews

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 10:30.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.