Disabling semi auto mode on M16

[War]

Dear sir,
Is there any way I can disable semi auto mode permanently on my M16?

Thank you

[kalnaren]

I imagine you could do it by filing down the semi-auto cutoff lever or something, but why would you want to?

[War]

Dear sir,
apparently, my M16 jammed when I switch to semiauto but work properly when I switch to auto. I'm tired of figuring what's wrong with it, so I decided to disable the semi auto mode. Is there anyway you guys can help me solve this problem?

Thank you

[Mist3r.B]

You can simply leave the lever at Full auto..

[coach]

did you really need to create a second thread on pretty much the same issue?

I don't think disabling semi is necessary as botch mentions just leave it in full auto mode.

[Cushak]

If you're determined, however, you don't need to file down the cut off lever. Just remove it. AFAIK This shouldn't cause any other problems other than removing semi-auto function.

(I could see why he'd want to do this, rather than risk flipping it to semi and seizing his gun up ingame)

Have you tried finding a local gun doctor who could take a look at it?

[coach]

yes but diagnosing the problem and fixing it is better in the long run rather than finding a work around for a patch job.

what's broken or not working will still be broken or not working.

[Forever_kaos]

Plus, it's great for the guns health to shoot once or twice in Semi auto to ensure the chamber is clear and the spring is decompressed!

[kalnaren]

Originally Posted by War

Dear sir,
apparently, my M16 jammed when I switch to semiauto but work properly when I switch to auto.

90% of the time that's caused by people letting off the trigger before the mechbox is finished cycling.

[ShelledPants]

Originally Posted by kalnaren

90% of the time that's caused by people letting off the trigger before the mechbox is finished cycling.

Assuming they have a normal gun...

My bet is an 8.4v mini pulling a 400fps spring...

[Cushak]

Originally Posted by ShelledPants

Assuming they have a normal gun...

My bet is an 8.4v mini pulling a 400fps spring...

Here's a post from his other thread (would have been easier if he didn't make a second thread), the battery is not the problem in this case.

Originally Posted by War

Dear sir,
This is my spec for the new mechbox;
Deepfire reinforced V2 6mm gearbox
Guarder IFTU gears
Guarder Halftooth Piston
Guarder IFTU motor
SP 150 ( changed into PDI 210% with hope to find a solution for this problem, yet still not solvable)
King Arms 11.1 V 1600maH Lipo battery.