WE Hi Capa mag release to WE single stack

Combine · February 11th, 2010, 19:10

Hey guys,

I have a WE 1911 single stack and a WE Hi Capa. The WE 1911 has a broken mag catch so I can't use it while the hi capa is perfectly a-ok.

I figured out that every part on the hi capa is compatible (slide, bushings, spring rod, hammer, trigger, etc) except for the mag release.

I'm wondering if anyone would know how I could modify the hi capa mag release to fit the 1911, so i can take all the good parts and repair my single stack.

Thanks a bunch for any info.

Styrak · February 11th, 2010, 19:27

Wouldn't work. It would be too wide since they are single stack and double stack grips. And they're differently designed grips.

Combine · February 11th, 2010, 19:35

Actually it will work!

I figured it out,

the piece fits perfectly but as you said the original hi capa grip is too wide so the release cannot catch the groove on the mag.

I figure all I need to do is either find a little plastic piece and glue it on or take epoxy puddy and make an extension to the metal.

juicy · February 11th, 2010, 19:43

No, it won't work. I tried when I still had my Socom Gear. TM Hi-Capa mag catch does shit nothing when inserted. Filling won't work either - but you can always try (and fail).

Your best bet is to contact WE directly (they will respond in under 5 days, in my experience). They can and will send you a replacement mag catch (they're like $15 USD or something like that) via non-UPS.

Edit: adding plastic will do shit nothing also, plastic will wear down like every other old-generation WE pot metal part, but just even faster, if that's even possible. Sorry to burst you bubble, man.

HeadlessChicken · February 11th, 2010, 19:55

Sorry to say that you may be SOL on this.

I sold my WE1911 to a friend and right there and then, the mag catch busted in half. Tried to epoxy it back but it wouldn't hold, the pot metal was too cheap. He bought a TM1911 mag catch and took a dremel to fit it but it won't catch the WE mags. I bought him a TM1911 mag and it still won't work. There doesn't seem to be any way out of it as it doesn't seem that anyone does an aftermarket part, you'll have to stick with WE replacement part and watch them break by the dozen.

I haven't searched on here for a while as my info is almost a year out dated. I don't know if anyone has found a solution to this problem.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 11th, 2010, 19:10	#1
Combine Trader rating Join Date: Sep 2005 Location: Alymer, Quebec	WE Hi Capa mag release to WE single stack Hey guys, I have a WE 1911 single stack and a WE Hi Capa. The WE 1911 has a broken mag catch so I can't use it while the hi capa is perfectly a-ok. I figured out that every part on the hi capa is compatible (slide, bushings, spring rod, hammer, trigger, etc) except for the mag release. I'm wondering if anyone would know how I could modify the hi capa mag release to fit the 1911, so i can take all the good parts and repair my single stack. Thanks a bunch for any info. __________________

February 11th, 2010, 19:27	#2
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	Wouldn't work. It would be too wide since they are single stack and double stack grips. And they're differently designed grips. __________________ Airsoft Sales and Repair/Upgrade Services

February 11th, 2010, 19:35	#3
Combine Trader rating Join Date: Sep 2005 Location: Alymer, Quebec	Actually it will work! I figured it out, the piece fits perfectly but as you said the original hi capa grip is too wide so the release cannot catch the groove on the mag. I figure all I need to do is either find a little plastic piece and glue it on or take epoxy puddy and make an extension to the metal. __________________ Last edited by Combine; February 11th, 2010 at 19:37..

February 11th, 2010, 19:43	#4
juicy Trader rating Join Date: Nov 2009 Location: Richmond, BC	No, it won't work. I tried when I still had my Socom Gear. TM Hi-Capa mag catch does shit nothing when inserted. Filling won't work either - but you can always try (and fail). Your best bet is to contact WE directly (they will respond in under 5 days, in my experience). They can and will send you a replacement mag catch (they're like $15 USD or something like that) via non-UPS. Edit: adding plastic will do shit nothing also, plastic will wear down like every other old-generation WE pot metal part, but just even faster, if that's even possible. Sorry to burst you bubble, man.

February 11th, 2010, 19:55	#5
HeadlessChicken Trader rating Join Date: Oct 2008 Location: Toronto, Ontario, Canada	Sorry to say that you may be SOL on this. I sold my WE1911 to a friend and right there and then, the mag catch busted in half. Tried to epoxy it back but it wouldn't hold, the pot metal was too cheap. He bought a TM1911 mag catch and took a dremel to fit it but it won't catch the WE mags. I bought him a TM1911 mag and it still won't work. There doesn't seem to be any way out of it as it doesn't seem that anyone does an aftermarket part, you'll have to stick with WE replacement part and watch them break by the dozen. I haven't searched on here for a while as my info is almost a year out dated. I don't know if anyone has found a solution to this problem. __________________ "Hey I'm the first one to say its a great country but its a straaaaange culture. This is a place where gun store owners are given a list of stolen credit cards but not a list of CRIMINALS and MANIACS. And now they're thinking of banning toy guns...AND THEY'RE GONNA KEEP THE F**KING REAL ONES!" -George Carlin 1937 - 2008 (RIP buddy)

WE Hi Capa mag release to WE single stack

Doctor's Corner