|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 20th, 2010, 12:03 | #1 |
Upgrading the TM L96AWS
Hi,
I m considering the TM L96 AWS and was wandering what would I need to do to crank it up to 450 fps with 0.2? I m hoping to keep as much TM part as possible (assuming they are top of the line and will support 450 fps...) Thanks for your advice
__________________
|
|
January 20th, 2010, 13:39 | #2 |
That's not really the way to go about upgrading a TM bolt action, because of Japanese law, these things are normally built to fail after you exceed 400 FPS.
However, PDI has a complete line of upgrades for the L96 http://www.x-fire.org/etop/tm_l96.html I'd suggest the Palsonite VC cylinder set... Oh.. it appears they don't have upgraded sears yet... Hrrrm... I'd keep it under 400 for now lol |
|
January 20th, 2010, 13:41 | #3 |
Doesn't it use VSR internals? If so then one could theoretically use sears designed for the VSR, along with most if not all other internal upgrades for a VSR.
|
|
January 20th, 2010, 13:46 | #4 |
no, they make TM L96 specific upgrades. You may be thinking of the Ares WA 2000, which is supposed to use TM VSR-10 internals.
|
|
January 20th, 2010, 14:51 | #5 |
NAAZ's #1 fan!
|
I seem to recall seeing a rather expensive (around 200usd) upgrade kit for the TM l96 maybe on redwolf??
-alex |
January 20th, 2010, 15:42 | #6 |
Bah, Using any parts but PDI or some of the other smaller precision manufactured parts would be a huge waste.
If you're going to spend the money, you may aswell spend a little bit more to make it out-class most other rifles on the field |
|
January 26th, 2010, 16:47 | #7 |
Ok, going in with Amos selection of:
PDI Palsonite VC Cylinder set PDI 2nd Sear PDI slotted end screw L96 130 (435 FPS) TM L96 AWS 6.01 inner barrel Firefly Hard Hop-up Rubber for Marui Hop system In the TM L96, Amos will gun doc it, I m curious to see how it turn out
__________________
|
|
May 31st, 2011, 15:57 | #8 |
How much sand CAN you fit in your vagina!?
|
Where can a guy acquire a TM L96 in Canada new? And How much?
|
June 16th, 2011, 20:18 | #9 |
theres a million dollar question, i see all these post of tm aws and other rare guns for canada and i always wonder where people get them from. i got a tm vsr-10 of redwolf after an expensive shiping cost and seperating the gun into parts. even that was extremly lucky to have got accross the border
|
|
June 16th, 2011, 20:24 | #10 |
Answer is Simple: AV
In My case I ain't AV'ed and I have beauty weapons that my own heart made out
__________________
Jean I has retired because of excessive beating and shooting, but his legacy will go on forever |
|
June 16th, 2011, 20:59 | #11 |
o
|
|
|
Bookmarks |
Thread Tools | |
|
|