|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
September 29th, 2008, 17:14 | #1 |
Biodegradable BBs
Some friends of mine bought some biodegradable BBs and something told me that it could be bad for their guns. What're the chances that biodegradable BBs will break and mess up their hop ups or mech boxes or whatever?
Thanks in advance. PS: They're Cybergun 0.20g if that makes any difference. |
|
September 29th, 2008, 17:19 | #2 |
Well, They get really picky about moisture, If they get wet, they will inflate and get stuck in your barrel and do some nasty damage. Plus, their diameter is pretty inconsistant. i'd avoid.
________ Amateur Secret Last edited by Strelok; April 11th, 2011 at 12:11.. |
|
September 29th, 2008, 17:19 | #3 |
Bio BBs, regardless of brand, all tend to be of substandard quality. they could result in jams of the barrel, hopup, or just jam up the magazine.
Nice guitar in your avatar, btw.
__________________
|
|
September 29th, 2008, 17:24 | #4 |
Cybergun don't make the best of... anything in Airsoft. So I'd avoid.
Buy Bastards. Also, why use bio bb's? |
|
September 29th, 2008, 17:27 | #5 |
Last edited by Strelok; April 11th, 2011 at 12:11.. |
|
September 29th, 2008, 17:29 | #6 |
There should be a couple of members around who play in Finland, where Bio's are required by LAW to be used in airsoft. They should be able to refer you to the good brands....
SHA DO
__________________
|
|
September 29th, 2008, 17:30 | #7 |
Thanks Crunchmeister, that's my Les Paul, haha. Anyways, basically I just wanted to be able to back up "Biodegradable BBs...Ewww." With some valid information.
|
|
September 29th, 2008, 17:39 | #8 |
I dunno, I play with Bio BB's with a TM / Systema barrel and I haven't had any problems. I would just suggest cleaning the barrel / hop up and lubing mags (which you should be doing anyways).
|
|
September 29th, 2008, 17:45 | #9 |
Hey there. I've been using G&G bio-bb's. weight wise they go up to .28 and have had no problems even with a 6.03 tightbore.
Cheers |
|
September 29th, 2008, 17:48 | #10 |
Bio BB's don't actually degrade significantly faster than regular BB's so saving the planet is really a moot point. If they actually did degrade faster I would consider using them (and taking the cost hit) but for cost and quality vs saving the planet I would go with regular BB's for now, maybe in the future I would use.
@ Panda: My home is in Vancouver and I find it's really humid a lot of the time does the ambient humidity affect the BB's? I was just wondering I mean I would go with Bastards when I get back but just for the sake of knowing.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
September 29th, 2008, 17:49 | #11 |
vision impaired
|
I have bio .2's in my m3 and you notice the imperfections in the spread. Sometimes 1 bb will veer right a little more then the other two but with non bio bb's they also tend to have a much better polish and all 3 bb's keep a decent grouping and predictable spread.
|
September 29th, 2008, 17:52 | #12 |
I've never really thought about it. I've never played in the rain, so I wouldn't know. I've never really paid attention to ambient humidity, so I'm not sure. But I do store them in:
A: the bag it came in B: inside a bigger ziplock C: in a rubber maid with all my crap I also throw in one of those "dissicant" (spelling?) moisture absorbing things that come with electronics / some food products to make sure there's no extra moisture getting in. |
|
September 29th, 2008, 17:56 | #13 |
bio bbs have also been known to break on mesh goggles causing the debris to go past the mesh = bad.
Panda is referring the oxygen absorbers that you usually find in food products. |
|
September 29th, 2008, 18:03 | #14 |
vision impaired
|
I've heard that too... Just knowing that even if nobody else is using bio bb's I would never wear those mesh goggles.
|
September 29th, 2008, 18:05 | #15 | |
Quote:
Although it can be said that the low quality bbs may also shatter, like the crappy tire ones you cna see the seams on, but no one really wants to mess their barrel up testing those. |
||
|
Bookmarks |
Thread Tools | |
|
|