|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
September 23rd, 2008, 11:27 | #1 |
Hop-up ajustment wheel screw getting loose
Every time I ajust the hop-up the ajustment wheel screw would move with the ajuster wheel and become loose after a while and no longer hold in place.
So I came up with this fix by putting a small mech-box gear shim on it. I put the shim on top of the ajuster wheel then I put screw back in and now when I ajust the hop-up the screw no longer moves. |
|
November 27th, 2008, 11:10 | #2 |
or just glue it down :b
|
|
November 27th, 2008, 11:21 | #3 |
Some metal body tolerances are really tight, so if you can't fit a shim in there (or don't have one), you can also sand down the post that gear mounts on to make the wheel tighter.
|
|
December 4th, 2008, 09:00 | #4 |
put a small pice of ducktape on the back of the wheel...it works
|
|
December 23rd, 2008, 04:22 | #5 |
You can put a shims just like a washer before the screw.
|
|
December 23rd, 2008, 05:08 | #6 |
A-56 aka Mr.Hitman
|
Did you notice you just repeated the same thing as in the first post of this thread?
|
December 23rd, 2008, 14:02 | #7 |
Then you would never really use a different weight BB.
__________________
"Any punk can shoot from across the room but it takes a real man to get close enough to stab" "Why cause a huge disturbance when you just wanna kill ONE guy?" - Chris Rock |
|
|
Bookmarks |
Thread Tools | |
|
|