|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 13th, 2008, 19:22
|
#1 |
|
Directions to M4 spring
Hey ya'll. I'm looking for a page (I'm sure already exhists) that shows step by step instructions on how to change the spring on my TM M4A1
__________________
Lower Mainland Airsoft Group Bolt Action L3; G-Spec @ 500 w/.20's G3 @ Broken Down MP5 @ 325 w/.20's MP5K @ 280 w/.20's |
|
|
|
July 13th, 2008, 19:43
|
#2 | |
|
check mechbox.com
look for the vid for the mechbox that the M4 uses, i think its a ver2... they will give you great vids on disassembly/re-assembly of your gun/mechbox
__________________
Quote:
Chinese proverb
|
|
|
|
|
|
July 13th, 2008, 20:16
|
#3 |
|
On mechbox.com, there's the complete disassembly of a TM M733 (essentially, the same process as an M4) including the opening and upgrading of the mechbox, and reassembly of the whole gun.
And be sure that if you upgrade your spring that you also get some metal bushings. Nylon won't hold up to well with stiffer springs.
__________________
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
