Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Tippmann Airsoft

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old February 25th, 2008, 12:31   #1
desiredtoe
 
desiredtoe's Avatar
 
Join Date: Nov 2005
Location: Barrie, Ontario
Tippmann Airsoft

A friend of mine owns a paintball store and is bringing in some Tippmann airsoft stuff. Has anyone seen these things in action? Anyone know anything about their quality?

They are really inexpensive, and I am considering picking up a GBB pistol.
__________________
Barrie, Ontario, Canada
G&G MP5A4
G&G M4A1
desiredtoe is offline   Reply With Quote
Old February 25th, 2008, 12:35   #2
Lakonian
kos
 
Lakonian's Avatar
 
Join Date: Feb 2006
Location: Wherever.
Quote:
Originally Posted by desiredtoe View Post
A friend of mine owns a paintball store and is bringing in some Tippmann airsoft stuff. Has anyone seen these things in action? Anyone know anything about their quality?

They are really inexpensive, and I am considering picking up a GBB pistol.
They're chinese rebrands. Don't believe they're too good.
Lakonian is offline   Reply With Quote
Old February 25th, 2008, 12:37   #3
matt491
 
matt491's Avatar
 
Join Date: Nov 2005
Location: Toronto
They make two co2 pistols, one "green gas" pistol, and a spring shotgun. Not very much selection and they're all fugly in my opinion compared to what's out there. The co2 glock rip off has an ugly extension on the mag for the co2 cartridge.
__________________
Quote:
Originally Posted by Bob the Angry Potato View Post
And you're calling us immature? Neuter yourself with a hammer.
Quote:
Originally Posted by Crunchmeister View Post
It will help to not get you flamed here, and will help you get a job that doesn't require the repeated use of the phrase "Would you like fries with that?"
matt491 is offline   Reply With Quote
Old February 25th, 2008, 13:29   #4
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
They are REALLY bad! I had a Tippman AK47 in my hands (belonged to Danonymous) for a while, not even sure if it shot over 200fps with 0.12g BBs (without any hop up) but if you dialed in even a bit of hop up (and using 0.12g) the range dropped to literally 10ft or so, the BBs fly out the barrel and drop fast. And I wasn't kidding about 10ft range, am 100% serious. And the internals aren't compatible with any other parts you might consider putting it.

So, either this one was fubar'd out of the box, or they are all like this.

Total waste of $200.
CDN_Stalker is offline   Reply With Quote
Old February 25th, 2008, 15:18   #5
Forever_kaos
 
Forever_kaos's Avatar
 
Join Date: Oct 2006
Location: Mississauga.
Quote:
Originally Posted by CDN_Stalker View Post
They are REALLY bad! I had a Tippman AK47 in my hands (belonged to Danonymous) for a while, not even sure if it shot over 200fps with 0.12g BBs (without any hop up) but if you dialed in even a bit of hop up (and using 0.12g) the range dropped to literally 10ft or so, the BBs fly out the barrel and drop fast. And I wasn't kidding about 10ft range, am 100% serious. And the internals aren't compatible with any other parts you might consider putting it.

So, either this one was fubar'd out of the box, or they are all like this.

Total waste of $200.
I too have the Ak-47
Out of the box I'm be afraid to game the thing (Plastic mechbox)
But so far what I've seen it is compatible, not 100% sure but I've had parts here and there change through-out and so far little off here and there but still good. If all else fails I plan to pick up a better Ak-47 and throw the metal body from the tippmann on the new one.

Last edited by Forever_kaos; February 25th, 2008 at 15:27..
Forever_kaos is offline   Reply With Quote
Old February 25th, 2008, 15:53   #6
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Mag is compatible with TM, and as far as the mechbox goes, I haven't personally taken it apart but Foxtail did to a point and said he didn't see anything recognisable in the mechbox that might be TM or aftermarket compatible.
CDN_Stalker is offline   Reply With Quote
Old February 25th, 2008, 18:32   #7
pOkiE
 
pOkiE's Avatar
 
Join Date: Feb 2007
Location: Honolulu, Hawaii
Send a message via AIM to pOkiE
i used to play paintball and tippmans always sucked. the ONLY cool thing they had was this thing called a drop barrel for their model98. its pretty comparable to a hop up on steroids...making the balls drop at a predetermined distance to make bunkering people a whole lot easier. it still, however, didnt make up for how shitty the guns are.
__________________
Armoury: TM M4, TM MC51 with SBS conversion, Sun Project M203, KSC MK23, TM MK23 Fixed Slide, KSC USP Compact, KSC USP.45, KSC Glock 26C(Taiwan Version), TM Glock 18C AEP

Quote:
Originally Posted by maxx View Post
I mean, even God carries a SOCOM.
pOkiE is offline   Reply With Quote
Old February 25th, 2008, 21:44   #8
mike909
Banned
 
Join Date: Jul 2007
Location: Ontario, Hamilton area
yeah tippman is the best paintball brand out there, but when it comes to airsoft I think its like crossman
mike909 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 03:52.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.