Tm P90 not working on SEMI

Azriel_Strife · January 27th, 2008, 17:12

***PLEASE DELETE***

Hi there, I just bought a TM P90 from a friend of mine and I knew the semi didn't work. He said it just needs one little part and the semi auto mode will work again. Some sort of little selector plate or something. he mentioned that it was causing the trigger to lock and he couldn't figure it out so he removed it.

He said that RedWolf doesn't have the part anymore, so does anyone know what part this is and where I can get it? The gun works perfect on full auto, so I'm thinking it's a peice in the selector switch.

Any insight to this problem would be appreciated as semi is a must with my lowcaps.

Thanks in advance!

163154 · January 27th, 2008, 17:35

cut of lever it follows a cam on the piston gear ask javp he should know where you can get one

Azriel_Strife · January 27th, 2008, 17:38

My friend said it was a part of the trigger. and it runs to the outside of the box that sounds like it.

mrsmellybelly · January 28th, 2008, 01:30

Yea it's a tiny little metal piece, i removed mine so i only shoot full auto lol

Kos-Mos · January 28th, 2008, 19:38

There is no selector plate in a P90.

The way the trigger works decides if it is semi or full auto.

You need the slider that goes inside the front-most part of the trigger group. It is pulled by a spring and it is the cut-off lever that disengage it so only 1 cycle is made.

If you open the trigger, it is a plastic part that holds a little copper block. The block slides back and forth with the trigger and makes the contact between the two tabs at the rear of the trigger.

You have to source a way to get some stock TM parts, as this is the only replacement.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 27th, 2008, 17:12	#1
Azriel_Strife Trader rating Join Date: Oct 2007 Location: Chilliwack B.C.	P90 cutoff lever Needed *PLEASE DELETE* Hi there, I just bought a TM P90 from a friend of mine and I knew the semi didn't work. He said it just needs one little part and the semi auto mode will work again. Some sort of little selector plate or something. he mentioned that it was causing the trigger to lock and he couldn't figure it out so he removed it. He said that RedWolf doesn't have the part anymore, so does anyone know what part this is and where I can get it? The gun works perfect on full auto, so I'm thinking it's a peice in the selector switch. Any insight to this problem would be appreciated as semi is a must with my lowcaps. Thanks in advance! __________________ Last edited by Azriel_Strife; January 27th, 2008 at 22:41..

January 27th, 2008, 17:35	#2
163154 Trader rating Join Date: Feb 2004 Location: north of newmarket	part cut of lever it follows a cam on the piston gear ask javp he should know where you can get one __________________ The fresh scent of burnt hair you just can't buy that!

January 27th, 2008, 17:38	#3
Azriel_Strife Trader rating Join Date: Oct 2007 Location: Chilliwack B.C.	My friend said it was a part of the trigger. and it runs to the outside of the box that sounds like it. __________________ Last edited by Azriel_Strife; January 27th, 2008 at 17:53..

January 28th, 2008, 01:30	#4
mrsmellybelly Trader rating Join Date: May 2005 Location: Charlotte	Yea it's a tiny little metal piece, i removed mine so i only shoot full auto lol

January 28th, 2008, 19:38	#5
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	There is no selector plate in a P90. The way the trigger works decides if it is semi or full auto. You need the slider that goes inside the front-most part of the trigger group. It is pulled by a spring and it is the cut-off lever that disengage it so only 1 cycle is made. If you open the trigger, it is a plastic part that holds a little copper block. The block slides back and forth with the trigger and makes the contact between the two tabs at the rear of the trigger. You have to source a way to get some stock TM parts, as this is the only replacement.

Tm P90 not working on SEMI

Doctor's Corner