TM 1911A1

Oz · July 16th, 2007, 00:33

Well, after seeing Bransons 1911 it pushed me over the edge to finally get mine done up.

Creation slide and outer barrel
Shooters Design frame
KA recoil and hammer springs
NineBall Dyna piston head
NineBall airseal chamber packing
TanoKoba hop-twist barrel
TanoKoba 3 hole trigger
PDI Delta Hammer
Creation Kimber Desert Warrior grips

Unfortunatly Den Terinity sent me a WA hammer spring housing instead of the TM one, so until that arrives I'm stuck with the stock TM curved one. I'm also still waiting on WGC to ship my mags and TK hoptwist barrel. I'm very dissapointed in their service as all the parts were ordered at the same time and they have yet to ship theirs. The Creation products are also somewhat dissapointing. They have quite a good reputation for metal kits and yes, the build quality is top notch but the finish of the slide is light purple in colour, which doesnt extend into the deeply stamped trades. The slide also didnt come with a rear sight so I'm stuck using the stock plastic one. The desert grips also had some molding flash around the edges and feel quite light and cheap. The Shooters Design frame has a nicer finish but I feel like I could scrape the trades off with my finger nail. I unfortunatly havnt had a chance to test fire it yet as my mags havnt arrived but I cant wait!

Enough babble, PICS!

Dr_Tinshnipz · July 16th, 2007, 00:45

Looks very nice!

wey ferro · July 16th, 2007, 02:18

nice one buuud!
does it use up alot of gas though or what?

Lakonian · July 16th, 2007, 03:13

Oh man! That looks like a Fullsized version of the shorty! Very nice man!

All you need now is a trigger job

SBranson23 · July 16th, 2007, 04:05

Very nice!!! I know what you mean about the strange hue to the Creation slide but you get used to it. I'll be interested to hear your results upon using it. I get about 12 shots on propane but I haven't changed the valves, piston head or nozzle yet. Also the Nine Ball hammer spring was too strong!! The slide wouldn't cycle properly.

Sorry to hi-jack but since you mentioned my inspiration here's a little photo of my TM M1911A1:

Eddie · July 16th, 2007, 22:13

If your going to thread jack so will I!!! But no apologies

j/k

WA Nighthawk Custom Vickers Tactical 1911 (Stock.......for now

)

Who knows where I can get a treaded barrel for a WA 1911? Or have one made...

Maelstrom · July 20th, 2007, 22:25

nooo i don't have my para ord HRT SCW pics to help hijack the thread!
Gotta love the 1911's and that's looking great oz. I think the dual tonish effect will grow on you, i know it did for me on my para ord with a pgc slide.

Cassius · July 21st, 2007, 01:00

Just got myself a custom WA Vreaker 12. It's a bit old, it's been used quite alot but I have a nice surprise for it;

Desert Warrior grips are already in the mail and I'm about to order a Wilson Combat slide then maybe a nice metal chamber and barrel.

My question is, what else will I need to fit that metal slide on it? A stronger spring and better valve I guess?

Anyone has good Tritium sights to suggest?

Oz · July 21st, 2007, 02:47

Metal slides are generally just a drop in. Not too many other accessories are nesesairy.

On a bit of an update, I got bored and dremeled the lower to accept the straight mainspring housing. Looks the heat. Pics will be up when my mags arrive and I can get some shooting done!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 16th, 2007, 00:33	#1
Oz Trader rating Join Date: Mar 2003 Location: Vancouver	TM 1911A1 Well, after seeing Bransons 1911 it pushed me over the edge to finally get mine done up. Creation slide and outer barrel Shooters Design frame KA recoil and hammer springs NineBall Dyna piston head NineBall airseal chamber packing TanoKoba hop-twist barrel TanoKoba 3 hole trigger PDI Delta Hammer Creation Kimber Desert Warrior grips Unfortunatly Den Terinity sent me a WA hammer spring housing instead of the TM one, so until that arrives I'm stuck with the stock TM curved one. I'm also still waiting on WGC to ship my mags and TK hoptwist barrel. I'm very dissapointed in their service as all the parts were ordered at the same time and they have yet to ship theirs. The Creation products are also somewhat dissapointing. They have quite a good reputation for metal kits and yes, the build quality is top notch but the finish of the slide is light purple in colour, which doesnt extend into the deeply stamped trades. The slide also didnt come with a rear sight so I'm stuck using the stock plastic one. The desert grips also had some molding flash around the edges and feel quite light and cheap. The Shooters Design frame has a nicer finish but I feel like I could scrape the trades off with my finger nail. I unfortunatly havnt had a chance to test fire it yet as my mags havnt arrived but I cant wait! Enough babble, PICS!

July 16th, 2007, 02:18	#3
wey ferro Trader rating Join Date: Dec 2004	nice one buuud! does it use up alot of gas though or what? __________________ www.ferroconcepts.com

July 21st, 2007, 01:00	#8
Cassius Trader rating Join Date: Mar 2006 Location: Montreal, Canada	Just got myself a custom WA Vreaker 12. It's a bit old, it's been used quite alot but I have a nice surprise for it; Desert Warrior grips are already in the mail and I'm about to order a Wilson Combat slide then maybe a nice metal chamber and barrel. My question is, what else will I need to fit that metal slide on it? A stronger spring and better valve I guess? Anyone has good Tritium sights to suggest? __________________ WE AIN'T DEAD Last edited by Cassius; July 21st, 2007 at 01:41..

July 16th, 2007, 03:13	#4
Lakonian kos Trader rating Join Date: Feb 2006 Location: Wherever.	Oh man! That looks like a Fullsized version of the shorty! Very nice man! All you need now is a trigger job

July 16th, 2007, 04:05	#5
SBranson23 Trader rating Join Date: Jun 2006 Location: Victoria,B.C.	Very nice!!! I know what you mean about the strange hue to the Creation slide but you get used to it. I'll be interested to hear your results upon using it. I get about 12 shots on propane but I haven't changed the valves, piston head or nozzle yet. Also the Nine Ball hammer spring was too strong!! The slide wouldn't cycle properly. Sorry to hi-jack but since you mentioned my inspiration here's a little photo of my TM M1911A1:

July 16th, 2007, 22:13	#6
Eddie Trader rating Join Date: Jun 2003 Location: Surrey, BC	If your going to thread jack so will I!!! But no apologies j/k WA Nighthawk Custom Vickers Tactical 1911 (Stock.......for now ) Who knows where I can get a treaded barrel for a WA 1911? Or have one made...

July 20th, 2007, 22:25	#7
Maelstrom Trader rating Join Date: Sep 2003 Location: Vancity	nooo i don't have my para ord HRT SCW pics to help hijack the thread! Gotta love the 1911's and that's looking great oz. I think the dual tonish effect will grow on you, i know it did for me on my para ord with a pgc slide.

July 21st, 2007, 02:47	#9
Oz Trader rating Join Date: Mar 2003 Location: Vancouver	Metal slides are generally just a drop in. Not too many other accessories are nesesairy. On a bit of an update, I got bored and dremeled the lower to accept the straight mainspring housing. Looks the heat. Pics will be up when my mags arrive and I can get some shooting done!

TM 1911A1

Airsoft Media