|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 21st, 2007, 19:17 | #1 |
help with my tm p90
it only fires about 6o% of the time even then it double fires half of the time. i know that its not the mags i used a friends mag in it and it did the same thing. the only thing i have done to it is replaced the tappet plate it worked fine after that for about 4 months then it started acting up. I have had it in the local shop twice but they don’t know what the hell there doing all they have ever really worked on is paint ball guns so any help would be of great help.
steven ruffcorn |
|
May 21st, 2007, 20:13 | #2 |
when you say it fires 60% of the time, is that in full auto or semi?
__________________
"Losers always whine about their best. Winners go home and f**k the prom queen"....Sean Connery in The Rock. |
|
May 21st, 2007, 21:07 | #3 |
both it does it in full auto and semi
Last edited by stevenruffcorn; May 21st, 2007 at 21:09.. |
|
May 21st, 2007, 23:32 | #4 |
Ya well I have only had mine for a few months now and i cant help you much with that, you have allready looked at the Tappit Plate and that would be where i would have looked first. you could try emailing Ken at http://www.007airsoft.com/main.htm I think he works on them.
__________________
"Losers always whine about their best. Winners go home and f**k the prom queen"....Sean Connery in The Rock. |
|
|
Bookmarks |
Thread Tools | |
|
|