Need people around Montreal with stock guns!

Kos-Mos · May 8th, 2007, 04:45

I have to make some instructions for the Mosfet switches I am selling, but I do not have acces to all the mechbox types.

I would need help from airsofters around here that would like to have a FREE Mosfet switch installed in their gun. If you want, I can remake the wiring of your gun at the same time, with some silicone wire (if you want it, I will have some wire for sale, ga 12 and 14,or bring your wire)

Right now I need to do the following mechbox:

V1 (Famas)
V2 (M4/M16 and such)
V3 (AK, G36)
V3 (AUG) Found
V7 (M14)

You can contact me by PM or e-mail at gawyn_rhuarc@hotmail.com

Jimski · May 23rd, 2007, 19:59

Hey Kos-Mos!
I have just mounted my mosfet and i'll be submitting pics tonight.

( aug - ver 3 gbx )

cheerz.

HaZarD SFD · May 23rd, 2007, 22:55

I will mail you my G&G M14 for this one Kos! Get on MSN and we can talk!

Jimski · May 23rd, 2007, 23:49

here is mine

is the wiring good?

the spring is a ms120 sp

it doesn't work with a 1700 Mah 9.6 V nicad battery.
it does work with 4200 mah 10.8 v nimh battery
does it heat a lot? apparently...

i'll test shoot it tomorrow...

Kos-Mos · May 24th, 2007, 22:33

Should not heat up that much...

Very hard to see if evrything is alright on that picture... that is why I will be doing a step-by-step installation instruction for all the mechboxes I can find

Hazard, I am sometimes between work and sleep... but not much.

I will be on Saturday almost all day long

Jimski · May 24th, 2007, 23:06

yeah, after more testing, it doesnt heat up that much, and the rof is better than before.

LUTNIT · May 25th, 2007, 00:32

What about the ver.6 in a P90?

Kos-Mos · May 29th, 2007, 02:33

This is the mechbox I used to do my test. Takes about 5 mins to install in a V.6

Instuctions are already done for that mechbox... so I don't need to do it again. Thanks anyways!

roughshadow · May 29th, 2007, 18:24

what is a Mosfet switch?

I am in the mids of needing to rewire my famas. (finaly) The wires are zombie like if you know what I mean

Kos-Mos · June 10th, 2007, 03:00

A Mosfet is an electronic component that is used here as a High capacity power switch.

It takes the majority of the electric flow from the copper trigger switch and so reduce the overall internal resistance.

roughshadow · June 10th, 2007, 07:37

If you were closer I say I have a version 1 coming up soon(I got to change wires they been smelling crispy and they are old and not that high quality)

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 8th, 2007, 04:45	#1
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	Need people around Montreal with stock guns! I have to make some instructions for the Mosfet switches I am selling, but I do not have acces to all the mechbox types. I would need help from airsofters around here that would like to have a FREE Mosfet switch installed in their gun. If you want, I can remake the wiring of your gun at the same time, with some silicone wire (if you want it, I will have some wire for sale, ga 12 and 14,or bring your wire) Right now I need to do the following mechbox: V1 (Famas) V2 (M4/M16 and such) V3 (AK, G36) V3 (AUG) Found V7 (M14) You can contact me by PM or e-mail at gawyn_rhuarc@hotmail.com Last edited by Kos-Mos; May 24th, 2007 at 22:36..

May 23rd, 2007, 22:55	#3
HaZarD SFD Trader rating Join Date: Sep 2005 Location: Ottawa	I will mail you my G&G M14 for this one Kos! Get on MSN and we can talk! __________________ No Comment.

May 24th, 2007, 22:33	#5
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	Should not heat up that much... Very hard to see if evrything is alright on that picture... that is why I will be doing a step-by-step installation instruction for all the mechboxes I can find Hazard, I am sometimes between work and sleep... but not much. I will be on Saturday almost all day long Last edited by Kos-Mos; May 24th, 2007 at 22:36..

May 23rd, 2007, 19:59	#2
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	Hey Kos-Mos! I have just mounted my mosfet and i'll be submitting pics tonight. ( aug - ver 3 gbx ) cheerz.

May 23rd, 2007, 23:49	#4
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	here is mine is the wiring good? the spring is a ms120 sp it doesn't work with a 1700 Mah 9.6 V nicad battery. it does work with 4200 mah 10.8 v nimh battery does it heat a lot? apparently... i'll test shoot it tomorrow...

May 24th, 2007, 23:06	#6
Jimski Trader rating Join Date: Jun 2005 Location: Montreal	yeah, after more testing, it doesnt heat up that much, and the rof is better than before.

May 25th, 2007, 00:32	#7
LUTNIT Trader rating Join Date: Dec 2005 Location: Ottawa	What about the ver.6 in a P90?

May 29th, 2007, 02:33	#8
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	This is the mechbox I used to do my test. Takes about 5 mins to install in a V.6 Instuctions are already done for that mechbox... so I don't need to do it again. Thanks anyways!

May 29th, 2007, 18:24	#9
roughshadow Banned Trader rating Join Date: May 2007 Location: Richmond Hill	what is a Mosfet switch? I am in the mids of needing to rewire my famas. (finaly) The wires are zombie like if you know what I mean

June 10th, 2007, 03:00	#10
Kos-Mos Trader rating Join Date: Nov 2005 Location: Lévis (QC)	A Mosfet is an electronic component that is used here as a High capacity power switch. It takes the majority of the electric flow from the copper trigger switch and so reduce the overall internal resistance. Last edited by Kos-Mos; June 10th, 2007 at 09:53..

June 10th, 2007, 07:37	#11
roughshadow Banned Trader rating Join Date: May 2007 Location: Richmond Hill	If you were closer I say I have a version 1 coming up soon(I got to change wires they been smelling crispy and they are old and not that high quality)

Need people around Montreal with stock guns!

Upgrades & Modifications