|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 20th, 2007, 07:45
|
#1 |
|
Modifying crane stock
Hey guys, i have just bought a crane stock today but its a sealed tubes model,and im wondering how should i modify it to make it usable with 3 piece crane stock batteries?
like this one 
__________________
"Вставай, проклятьем заклеймённый, Весь мир голодных и рабов!" "乌拉!" |
|
|
|
February 20th, 2007, 15:49
|
#2 |
|
you can hack saw/ dremel the buffer into a gnp buffer tube style easy. i did it..
what crane stock is it exactly?
__________________
www.ferroconcepts.com |
|
|
|
|
February 20th, 2007, 21:38
|
#3 |
|
|
I think its a Classic army one
it look like this  and here is the sealed tubes on both sides  this is the batt
__________________
"Вставай, проклятьем заклеймённый, Весь мир голодных и рабов!" "乌拉!" |
|
|
|
|
February 20th, 2007, 21:50
|
#4 |
|
I think you got the KA one, the one that's meant to store CR123A battery in the stock.
|
|
|
|
|
February 20th, 2007, 22:24
|
#5 |
|
|
O really?how tho XD?~
the tubes on both sides seems to be sealed all d way do i need to cut up holes for the wires to go in?
__________________
"Вставай, проклятьем заклеймённый, Весь мир голодных и рабов!" "乌拉!" |
|
|
|
|
February 21st, 2007, 01:26
|
#6 |
|
|
Can't really see your lid cover, but it reminds of the KA ones since the stock pad doesn't really look like the CA one. It's strictly to store CR123A batteries or AA, not use.
http://kingarms.com/productpage.asp?prodid=544 If it's the same one, you'll need to drill holes through those tubes so the wires can go through. |
|
|
|
|
February 21st, 2007, 04:59
|
#7 |
|
|
yeah..i guess i need to visit rona tmr : D
__________________
"Вставай, проклятьем заклеймённый, Весь мир голодных и рабов!" "乌拉!" |
|
|
|
|
March 3rd, 2007, 21:39
|
#8 |
|
Hope this helps yah out a little http://www.arniesairsoft.co.uk/forum...howtopic=92626
__________________
We'll do it like the Italian Job! |
|
|
|
|
March 3rd, 2007, 22:12
|
#9 |
|
GBB Whisperer
|
Not only would you have to open up the tubes, but you would have to cut channels out of the interior of the stock...
You'll save yourself a load of headaches by just picking up a G&P Crane stock... Or if you're set on using large sub-C cells, then you'll have to go with Prime. |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
