screw on free floating RAS

Kokanee · October 15th, 2006, 12:25

I'm looking to completely replace the handguards on my ICS M4 RIS. What I am after is a RAS unit that screws right onto the body, no need for a delta ring or barrel nut.

I know there is the airsoft kelowna model out there but it's full length, and I'd prefer a ready to go product.

Looked around on wgc etc and can't seem to find a RAS unit that fits the bill.. Anyone have any ideas/leads I'd me much appreciative.

Dirty Deeds · October 15th, 2006, 12:51

Josh,

I have the full length M16 RAS from AS Kelowna. It's a very nice unit. They have a special on them right now $150 plus shipping. If need be, I have the means to cut it down, to an M4 length, for you.

mcguyver · October 15th, 2006, 12:53

I bought the KA MRE RAS and KA FU front site (model B) and they fit on the ICS M4 with minimal work. All that needed to be done was trim some of the sight nothces for the screws on the new sight. The stock barrel is not the most solid there is, and I would go with a quality one-piece over the ICS sectioned one. The MRE was not intended for my ICS, so it didn't stay on. I just did a "try it and see" sort of thing.

I've also installed the AK one (Metal Tech brand). They go on with little effort.

Kokanee · October 15th, 2006, 13:06

Thanks Scott, I'll keep that in mind.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 15th, 2006, 12:25	#1
Kokanee Ministry of Peace Trader rating Join Date: Mar 2002	screw on free floating RAS I'm looking to completely replace the handguards on my ICS M4 RIS. What I am after is a RAS unit that screws right onto the body, no need for a delta ring or barrel nut. I know there is the airsoft kelowna model out there but it's full length, and I'd prefer a ready to go product. Looked around on wgc etc and can't seem to find a RAS unit that fits the bill.. Anyone have any ideas/leads I'd me much appreciative.

October 15th, 2006, 12:51	#2
Dirty Deeds Trader rating Join Date: May 2004 Location: Montreal	Josh, I have the full length M16 RAS from AS Kelowna. It's a very nice unit. They have a special on them right now $150 plus shipping. If need be, I have the means to cut it down, to an M4 length, for you. __________________ Team Bad Karma(BK-09) CAUTION: Evil Genius at Work Those that wear the "Tin Foil Hat" stand on guard for thee. All others stand on guard for themselves.

October 15th, 2006, 12:53	#3
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	I bought the KA MRE RAS and KA FU front site (model B) and they fit on the ICS M4 with minimal work. All that needed to be done was trim some of the sight nothces for the screws on the new sight. The stock barrel is not the most solid there is, and I would go with a quality one-piece over the ICS sectioned one. The MRE was not intended for my ICS, so it didn't stay on. I just did a "try it and see" sort of thing. I've also installed the AK one (Metal Tech brand). They go on with little effort. __________________ Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy.

October 15th, 2006, 13:06	#4
Kokanee Ministry of Peace Trader rating Join Date: Mar 2002	Thanks Scott, I'll keep that in mind.

screw on free floating RAS

Accessories Discussion