Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

STAR UMP possible motor problem?

:

Doctor's Corner

Reply
 
Thread Tools
Old August 6th, 2006, 04:58   #1
Quaff
 
Quaff's Avatar
 
Join Date: Feb 2005
STAR UMP possible motor problem?

Hi, I recently purchased a STAR UMP. Earlier today I was testing it to see how well it performs.
I noticed right away that it would only fire one shot on semi auto, then stop functioning. I switched it to full auto and it worked fine, switched back to Semi and same problem, it fired one then stopped working. By stopped working I mean every trigger pull on semi, following the first that worked, would not make a sound at all, just a blank pull.

So I ran one full 110 round mag through on full auto, no problems. I only got halfway through the second mag before the motor started making a funny noise and the gun no longer fires. It sounds like a loud cordless drill.

I know extremely little about how airsoft guns work as I have very little practical experience with anything internal. So my best guess is that something has either broken or disconnected in between the motor and the piston?

The motor is: "High Torque Flat Motor" as stated in the manual. If anyone has any experience with this type of problem can you please PM me or post here. If you happen to be a gun doctor within an hour or so from Orillia Ontario, I would be interested in giving you some business.
Thank you.
Brian

Oh if anyone is interested, the gun shot GREAT for that first mag, I was very happy with the performance out of the box...you know, 'till it fried..
__________________
Quaff is offline   Reply With Quote
Old August 6th, 2006, 08:18   #2
Bestec
 
Bestec's Avatar
 
Join Date: Jul 2006
Location: Norway
maybe you didnt charge the battery long enough, or maybe the battery isnt properly connected inside the gun
__________________
"It's just ten percent luck
Twenty percent skill
Fifteen percent concentrated power of will
Five percent pleasure
Fifty percent pain
And a hundred percent reason to remember the name"
Bestec is offline   Reply With Quote
Old August 6th, 2006, 08:39   #3
Dirty Deeds
 
Dirty Deeds's Avatar
 
Join Date: May 2004
Location: Montreal
Send a message via MSN to Dirty Deeds Send a message via Yahoo to Dirty Deeds
Did you try re-seating the motor. Sounds like your motor height is not set right. Try adjusting it.
__________________
Team Bad Karma(BK-09)
CAUTION: Evil Genius at Work

Those that wear the "Tin Foil Hat" stand on guard for thee. All others stand on guard for themselves.

Dirty Deeds is offline   Reply With Quote
Old August 7th, 2006, 21:49   #4
Identity
Banned
 
Join Date: Aug 2003
Location: Markham, Toronto
Quote:
Originally Posted by Dirty Deeds
Did you try re-seating the motor. Sounds like your motor height is not set right. Try adjusting it.
Yeah, it could be taht the motor is not seating on the gears properly.
It sounds like when you shoot semi auto on a TM gun and then when it doesnt go a full gear, It stops and it wont shoot, making that clicking noise.
Use an allen key and where the motor is fitted adjust it and see if the gun starts shooting.

Quote:
Originally Posted by Bestec
maybe you didnt charge the battery long enough, or maybe the battery isnt properly connected inside the gun
Nothing to do with the battery. As long as he fully charged it the first time then it should be fine.
Identity is offline   Reply With Quote
Old August 16th, 2006, 01:32   #5
Quaff
 
Quaff's Avatar
 
Join Date: Feb 2005
Syphen and myself pulled the entire damn thing apart today. The problem was the spur gear stripped a whack of teeth off. I do not know how that would happen on a brand new gun. When I get a replacement part, what should I look at to make sure that when the gun is put back together, that this does not happen so quickly again?

For anyone wondering:

It is a version 3 mechbox
Short Type motor (I assume that means 700?)

Before we get replacements and put this sucker back together, if anyone has any questions about the internals please feel free to ask, I cannot guarantee an answer but I will try.
Thanks for all of the suggestions, I checked each one. I will try to take a pic of the stripped gear if I can grab a digicam.
__________________
Quaff is offline   Reply With Quote
Old August 16th, 2006, 01:43   #6
Blastyman
 
Blastyman's Avatar
 
Join Date: Feb 2003
Location: Edmonton ,AB
Send a message via ICQ to Blastyman
It happened because the motor screw wasn't set right is what I am thinking
Blastyman is offline   Reply With Quote
Old August 16th, 2006, 02:32   #7
Identity
Banned
 
Join Date: Aug 2003
Location: Markham, Toronto
Quote:
Originally Posted by Quaff
Syphen and myself pulled the entire damn thing apart today. The problem was the spur gear stripped a whack of teeth off. I do not know how that would happen on a brand new gun. When I get a replacement part, what should I look at to make sure that when the gun is put back together, that this does not happen so quickly again?

For anyone wondering:

It is a version 3 mechbox
Short Type motor (I assume that means 700?)

Before we get replacements and put this sucker back together, if anyone has any questions about the internals please feel free to ask, I cannot guarantee an answer but I will try.
Thanks for all of the suggestions, I checked each one. I will try to take a pic of the stripped gear if I can grab a digicam.
V3 gearbox hmm nice nice...
It uses a 8.4/9v mini battery right?
For some reason I wanna sell my like new G36C for an AK47...Sigh...
Identity is offline   Reply With Quote
Old August 16th, 2006, 09:57   #8
Syphen
 
Syphen's Avatar
 
Join Date: Jul 2004
Location: Orillia, Ont.
Quote:
Originally Posted by Identity
V3 gearbox hmm nice nice...
It uses a 8.4/9v mini battery right?
For some reason I wanna sell my like new G36C for an AK47...Sigh...

It uses a stick battery, why sell a G36C for an AK? I mean, AK's are cool and all, but G36's are v3 as well.
__________________

Sponsored by Boland Howe: Cause Scheisse Happens
www.bolandhowe.com
Syphen is offline   Reply With Quote
Old August 16th, 2006, 12:16   #9
Identity
Banned
 
Join Date: Aug 2003
Location: Markham, Toronto
Quote:
Originally Posted by Syphen
Quote:
Originally Posted by Identity
V3 gearbox hmm nice nice...
It uses a 8.4/9v mini battery right?
For some reason I wanna sell my like new G36C for an AK47...Sigh...

It uses a stick battery, why sell a G36C for an AK? I mean, AK's are cool and all, but G36's are v3 as well.
I wanna go Jihad... :-(
Ak has longer barrel and looks so sexy...
Black Ak47 makes me wet. :lol:!
Identity is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 10:31.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.