wobbly upper and lower?

devbro · December 27th, 2016, 19:46

This project is hitting almost every possible problem imaginable. so here is the latest problem:
I got a set of upper and lower receiver, by Daniel Defense logo on them. All the sets I have seen has either the rabbit ears coming out of upper and goes into lower OR the back of upper has a part sticking out which slides into lower. It is not the case with the upper and lower that I got in my possession !!! Instead there are these tiny holes at the back of upper that aligns with similar holes on the lower. I am correct to assume something is suppose to go in these holes? If so what? where can I buy them?

Here are the picture in case of interest:
https://drive.google.com/drive/folde...ms?usp=sharing

Darklen · December 27th, 2016, 20:27

Looks like how Classic Army do it. There should be pins in the holes in the upper. Any small roll pin that fits will work.

ThunderCactus · December 27th, 2016, 20:47

^ +1

devbro · December 27th, 2016, 21:36

Classic army eh! thank you my friend, you are on the money

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 27th, 2016, 19:46	#1
devbro Trader rating Join Date: Feb 2016 Location: Thornhill, ON, Canada, North America, Earth	wobbly upper and lower? This project is hitting almost every possible problem imaginable. so here is the latest problem: I got a set of upper and lower receiver, by Daniel Defense logo on them. All the sets I have seen has either the rabbit ears coming out of upper and goes into lower OR the back of upper has a part sticking out which slides into lower. It is not the case with the upper and lower that I got in my possession !!! Instead there are these tiny holes at the back of upper that aligns with similar holes on the lower. I am correct to assume something is suppose to go in these holes? If so what? where can I buy them? Here are the picture in case of interest: https://drive.google.com/drive/folde...ms?usp=sharing

December 27th, 2016, 20:27	#2
Darklen Administrator Trader rating Join Date: Jan 2004 Location: Red Deer, AB	Looks like how Classic Army do it. There should be pins in the holes in the upper. Any small roll pin that fits will work. __________________ *ASC Age Verifier for Red Deer & Area Alberta*

December 27th, 2016, 20:47	#3
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	^ +1

December 27th, 2016, 21:36	#4
devbro Trader rating Join Date: Feb 2016 Location: Thornhill, ON, Canada, North America, Earth	Classic army eh! thank you my friend, you are on the money

wobbly upper and lower?

Upgrades & Modifications