|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
February 24th, 2015, 22:51
|
#1 |
|
CA M24 Upper Receiver Slide
I've noticed a small issue with my rifle recently as I was plinking in my backyard preparing for the upcoming season. Upon cocking the rifle back I noticed a small sliding of the upper receiver. This occurs when I cock the rifle and when I push the bolt back as well. Its a sliding distance of about 1/4 of an inch. Now I don't know if this is a normal thing and if others have experienced this issue, however, I've never had it happen before nor have I experienced it while using other CA M24's in the past.
Could this possible be the retaining screws showing signs of stripping? Or is it something else? 
|
|
|
|
February 28th, 2015, 16:53
|
#2 |
|
|
Anybody know, or have ideas why its doing this?
|
|
|
|
|
February 28th, 2015, 17:08
|
#3 | ||
|
Most likely the screws holding the stock on are stripping, they are made of the most craptastic metal ever. Take them to a hardware store and pick up some steel ones of the same length. If i remember i was unable to find a bolt the right length for the front, had to cut down one to size.
__________________
Quote:
Quote:
|
||
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
