KJW P14.45 mags

CrazyChoda · October 11th, 2005, 00:12

I have 3 and two have already blown, i tried replacing the seals, but they still let out the gas faster then i can put it in, what is the problem, can it be fixed, or do i have to buy new mags?

-Choda

Kane · October 12th, 2005, 01:56

Take out the valve and soak it in silicon oil for a couple of days. Fix's it perfect!

tomsoderman · October 12th, 2005, 12:38

the valve on the bottom of the mag?

CrazyChoda · October 12th, 2005, 15:44

no, when i fill it at the bottom, the gas all escapes through the top seal

tomsoderman · October 12th, 2005, 16:15

that means you need a new rubber seal.
I think the WA seals are compatable with the kjw mags you might want to ask somebody though.

tomsoderman · October 12th, 2005, 16:16

sorry i did not realise you already tried that. Maybe you are using the wrong type of seal

CrazyChoda · October 15th, 2005, 21:21

i actually think it may be the valve, or something, if the valves are fucked is it better to just buy new mags or try and fix them

Kane · October 19th, 2005, 20:51

Hey, please listen to what I suggested.... I had the exact same problem with one of my Para mags, and the above solution fixed it perfectly! Basically, the rubber seal has dried out and the valve no longer seals properly. Silicon oil seems to fix the problem, which occurs on quite a few of the Para mags - apparently.

Cheers

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 11th, 2005, 00:12	#1
CrazyChoda Trader rating Join Date: Jul 2005 Location: Aurora, Ontario	KJW P14.45 mags I have 3 and two have already blown, i tried replacing the seals, but they still let out the gas faster then i can put it in, what is the problem, can it be fixed, or do i have to buy new mags? -Choda __________________ Help Choda with his Danish M84 kit, I need BDU's, vest, anything danish flecktarn you can think of, PM me if you have anything for sale! Feel like chatting? Add me to msn (crazy_danish@hotmail.com)

October 12th, 2005, 01:56	#2
Kane Trader rating Join Date: May 2002 Location: Salmon Arm, BC	Take out the valve and soak it in silicon oil for a couple of days. Fix's it perfect! __________________ “You hear the far-off crack of a rifle, your fate finally registering in your subconscious far too late as the white hot bullet penetrates your skull. Another round slams into the chamber even as your lifeless body falls to the ground…”---Unknown sniper “Invisible souls leave .308 holes.”----USMC Recon Sniper

October 12th, 2005, 15:44	#4
CrazyChoda Trader rating Join Date: Jul 2005 Location: Aurora, Ontario	no, when i fill it at the bottom, the gas all escapes through the top seal __________________ Help Choda with his Danish M84 kit, I need BDU's, vest, anything danish flecktarn you can think of, PM me if you have anything for sale! Feel like chatting? Add me to msn (crazy_danish@hotmail.com)

October 12th, 2005, 12:38	#3
tomsoderman Trader rating Join Date: Feb 2005	the valve on the bottom of the mag?

October 12th, 2005, 16:15	#5
tomsoderman Trader rating Join Date: Feb 2005	that means you need a new rubber seal. I think the WA seals are compatable with the kjw mags you might want to ask somebody though.

October 12th, 2005, 16:16	#6
tomsoderman Trader rating Join Date: Feb 2005	sorry i did not realise you already tried that. Maybe you are using the wrong type of seal

October 15th, 2005, 21:21	#7
CrazyChoda Trader rating Join Date: Jul 2005 Location: Aurora, Ontario	i actually think it may be the valve, or something, if the valves are fucked is it better to just buy new mags or try and fix them __________________ Help Choda with his Danish M84 kit, I need BDU's, vest, anything danish flecktarn you can think of, PM me if you have anything for sale! Feel like chatting? Add me to msn (crazy_danish@hotmail.com)

October 19th, 2005, 20:51	#8
Kane Trader rating Join Date: May 2002 Location: Salmon Arm, BC	Hey, please listen to what I suggested.... I had the exact same problem with one of my Para mags, and the above solution fixed it perfectly! Basically, the rubber seal has dried out and the valve no longer seals properly. Silicon oil seems to fix the problem, which occurs on quite a few of the Para mags - apparently. Cheers __________________ “You hear the far-off crack of a rifle, your fate finally registering in your subconscious far too late as the white hot bullet penetrates your skull. Another round slams into the chamber even as your lifeless body falls to the ground…”---Unknown sniper “Invisible souls leave .308 holes.”----USMC Recon Sniper

KJW P14.45 mags

Doctor's Corner