Custom Order Plexiglass Shield Locations

Spadona · July 10th, 2014, 19:22

Has anyone ordered custom-cut plexiglass/acrylic shields to protect your optics?

I'm looking to make replacement lenses for a optic shield I purchased a while back, but I'm not sure which place makes good quality custom-cut plexiglass for a decent price. Can anyone advise?

For reference, I would need lenses to be used on this stand.

Jamroxorz · July 10th, 2014, 19:47

Why not go to Home Depot grab a sheet for 5$ and make it yourself? I make plexiglass lens protectors for all my optics myself.

Spadona · July 10th, 2014, 19:52

Quote:

Originally Posted by Jamroxorz

Why not go to Home Depot grab a sheet for 5$ and make it yourself? I make plexiglass lens protectors for all my optics myself.

What tools do you use to cut it? Tablesaw? Handsaw?

Jamroxorz · July 10th, 2014, 20:24

I first cut the shape with an exacto knife and the use side cutters. This is cause the plexiglass likes to break in random directions, so the line from the exacto knife gives it a path. After that I take my Dremel and just sand the edges to the exact size.

lurkingknight · July 11th, 2014, 00:47

plexi is not the material you want to use.

Dynamo · July 11th, 2014, 06:08

you want Lexan/Polycarbonate.

siggypoo · July 11th, 2014, 08:11

How well does plexi or lexan hold it's clarity when vacuum molded?

shinobii · July 11th, 2014, 09:25

Seems like a tonne of work.
http://mach1airsoft.com/page/9/?s=sp...t_type=product
Speed shields are twice as thick. You will not have any breakage issues with these shields. Bar none, you will not find a better Optice shield on the market. Worth the investment.

Made in Canada 100%
Just throwing out some options for you.

lurkingknight · July 11th, 2014, 10:13

you do need special tools to cut polycarb.. it generally melts when you use power tools and when you go slow it makes a mess and takes forever.

It cost me like 30 bucks to have 2 small disks made to use on my scope and it's not thick enough to stop a direct shot from close up. If a product exists, I would go and buy that product to save the hassle.

But I believe lexan/polycarb will maintain its transparency when you vacuum form it, so long as you don't overcook it.

Stealth · July 11th, 2014, 10:30

Psst... one of the best (read: least janky) ways you can cut it is with a CO2 laser.

Spadona · July 11th, 2014, 13:35

I was thinking of using a piece of clear acrylic, but I'm not exactly sure what's the safest way of cutting it (I also need to drill holes for the screws that holds it in place). What are your thoughts?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 10th, 2014, 19:22	#1
Spadona Trader rating Join Date: Jun 2013 Location: Scarborough, ON	Custom Order Plexiglass Shield Locations Has anyone ordered custom-cut plexiglass/acrylic shields to protect your optics? I'm looking to make replacement lenses for a optic shield I purchased a while back, but I'm not sure which place makes good quality custom-cut plexiglass for a decent price. Can anyone advise? For reference, I would need lenses to be used on this stand. Last edited by Spadona; July 10th, 2014 at 19:23.. Reason: Added reference link

July 11th, 2014, 00:47	#5
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	plexi is not the material you want to use. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

July 11th, 2014, 06:08	#6
Dynamo Harvester of Noobs' Sorrow Trader rating Join Date: Oct 2003 Location: T̆͒ͥ̓̿̅̈́̐͊̿͗̐̾̃͐ͧ&#8	you want Lexan/Polycarbonate. __________________ Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯.

July 10th, 2014, 19:47	#2
Jamroxorz Jamroz Trader rating Join Date: Aug 2011 Location: Brampton Ontario	Why not go to Home Depot grab a sheet for 5$ and make it yourself? I make plexiglass lens protectors for all my optics myself.

July 10th, 2014, 20:24	#4
Jamroxorz Jamroz Trader rating Join Date: Aug 2011 Location: Brampton Ontario	I first cut the shape with an exacto knife and the use side cutters. This is cause the plexiglass likes to break in random directions, so the line from the exacto knife gives it a path. After that I take my Dremel and just sand the edges to the exact size.

July 11th, 2014, 08:11	#7
siggypoo Trader rating Join Date: Mar 2009 Location: Oshawa, Ontario.	How well does plexi or lexan hold it's clarity when vacuum molded? __________________

July 11th, 2014, 09:25	#8
shinobii Trader rating Join Date: Sep 2008	Seems like a tonne of work. http://mach1airsoft.com/page/9/?s=sp...t_type=product Speed shields are twice as thick. You will not have any breakage issues with these shields. Bar none, you will not find a better Optice shield on the market. Worth the investment. Made in Canada 100% Just throwing out some options for you. __________________ Premier Pro-Grade Canadian AEG supplier http://www.mach1airsoft.com/ sales@mach1airsoft.com Like Us on FACEBOOK Follow Us on Twitter Store Hours of Operation: Tue-Wed: 11:00am-5:00pm Thurs: 11:00am-8:00pm Fri: 11:00am-5:00pm Sat: 10:00-5:00pm Retail Store Address: 237 Toryork Drive, Toronto Ontario.

July 11th, 2014, 10:13	#9
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	you do need special tools to cut polycarb.. it generally melts when you use power tools and when you go slow it makes a mess and takes forever. It cost me like 30 bucks to have 2 small disks made to use on my scope and it's not thick enough to stop a direct shot from close up. If a product exists, I would go and buy that product to save the hassle. But I believe lexan/polycarb will maintain its transparency when you vacuum form it, so long as you don't overcook it. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.

July 11th, 2014, 10:30	#10
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	Psst... one of the best (read: least janky) ways you can cut it is with a CO2 laser.

July 11th, 2014, 13:35	#11
Spadona Trader rating Join Date: Jun 2013 Location: Scarborough, ON	I was thinking of using a piece of clear acrylic, but I'm not exactly sure what's the safest way of cutting it (I also need to drill holes for the screws that holds it in place). What are your thoughts?

Custom Order Plexiglass Shield Locations

Accessories Discussion