G@G M4 Random Not firing issue.

[Chromey]

And the problem continue with this gun.

The problem:

The gun can be shooting fine for hundreds of shots then Nothing, No Clicks No cycle, Nothing.
I hit the lower And it will start too shoot again.
So Ive tightened all Connectors(crimped), Tried different batteries, Nothing.

Ive cleaned my contacts on my trigger switch, Still does not fix the issue.

So the next thing im going too try is replace the entire trigger contact assembly and wire.
If that dos not solve this, A new motor.
If that does not work, Im done with this gun.

Can anyone suggest anything else?

[DustMagnet]

This isn't a case of shooting hundreds of shots in semi is it? If so, instead of smacking the lower does switching to auto fix it? If so, make sure you always pull the trigger fully and keep it pulled till the end of the cycle.

Sent from my Nexus 5 using Tapatalk

[Chromey]

Originally Posted by DustMagnet

This isn't a case of shooting hundreds of shots in semi is it? If so, instead of smacking the lower does switching to auto fix it? If so, make sure you always pull the trigger fully and keep it pulled till the end of the cycle.

Sent from my Nexus 5 using Tapatalk

This happens in Full and semi, So switching does nothing.
Can it be the selector plate?

[Chromey]

Figured it out.
My Old G@G Motor is the issue.
I borrowed a motor from my MP5 and the problem has vanished.

Ordering a new motor now.