how to program a baofeng uv-5r

[solidgear34]

so i recently just newly aquired a baofeng uv-5r for an upcoming game and im really excited, but i noticed that the channels are very different from the normal shitty motorolas, but due to some of my team owning mosty motorola t9500s i need to set my secondary channel so that i can communicate with them. can anyone teach me how to program it so that i can have a similar channel system with the motorola radios?

[xav1982]

Cant help you but I need the same answer


Sent from my iPhone using Tapatalk

[Cobrajr122]

This video does a good job of explaining how to program the radio (yay google!)


This is a list of the frequencies you need to use.
Both Transmit and receive are the same for each channel.
Do not use CTCSS or DCS

Channel-----Frequency in MHz
1-- 462.5625
2-- 462.5875
3-- 462.6125
4-- 462.6375
5-- 462.6625
6-- 462.6875
7-- 462.7125
8-- 467.5625
9-- 467.5875
10-- 467.6125
11-- 467.6375
12-- 467.6625
13-- 467.6875
14-- 467.7125
15-- 462.550
16-- 462.575
17-- 462.600
18-- 462.625
19-- 462.650
20-- 462.675
21-- 462.700
22-- 462.725

[j3ttamaster]

https://www.youtube.com/watch?v=56PvtAqacz8

http://wiki.radioreference.com/index..._channel_chart


1) Turn radio on
2)make sure its set to frequency mode
3)print of the list of frequency
4) pick a frequency you want to save ( for example channel 1 on cheap radios everyone uses is 462.5625 mhz)
5) type in the frequency you plan on saving
6) once frequency is typed in hit "menu" button
7)then hit number 27 (This will take you to the spot were you save the frequency to a channel#
8)after you hit 27 hit "menu" again. Now if your saving frequency I showed in the example that frequency is what channel 1 is on cheap radios so I would advise seting that one to channel 1
9) once you found your channel hit "menu" again and you should hear "Receiving memory" when you hear that that hit "menu" again it should now say "Transmitting memory" now hit exit

this worked for me so hope it helps

There you go you have just manually programed one channel now only ton more to go

[j3ttamaster]

set your radio the same way the youtube video show

[j3ttamaster]

I never watched cobras posted video till now, it pretty good too.

[solidgear34]

cool thanks, and one more thing im trying to set up a general frequency for the squad but everytime i want to type 2 in the end it turns to a 0
... why?

[Cobrajr122]

Can only end in x.xx5 or x.xx0 / x.xxx5 or x.xxx0

ONLY USE THE FREQUENCIES I LISTED, using anything else is against the law.

[wheelerg]

Originally Posted by solidgear34

so i recently just newly aquired a baofeng uv-5r for an upcoming game and im really excited, but i noticed that the channels are very different from the normal shitty motorolas, but due to some of my team owning mosty motorola t9500s i need to set my secondary channel so that i can communicate with them. can anyone teach me how to program it so that i can have a similar channel system with the motorola radios?

Use the CHIRP softwear its free, but you need a usb cord for the radio, $10 on ebay, makes it a lot easier to program and quicker

[Pointy]

I used this site;

http://uv5r.net/uv-5r-channel-mode/#saving-channel

[Chiba]

My problem is that for some reason I can't transmit... any ideas why?

[Zack The Ripper]

I have had transmission issues with mine as well. I'm in the works of trying to reprogram everything over again to see if I can correct the issue.

[solidgear34]

just curious, is anyone else having this issue that everytime you press 2 at the end of selecting frequency that the baofeng automatically rounds it into a whole number like
turning a 62 to 60? and i cant seem to access the 4th digit for some reason

i also set errything to the right channel but forsome reason my motorola wont pick up the frequency... why is htat?

[Chiba]

Originally Posted by Chiba

My problem is that for some reason I can't transmit... any ideas why?

Edit: Solved it. Two issues:

1) I was in duplex. Simplex is OK
2) I was using a handsfree - make sure to PUSH IT IN HARD. I thought I had pushed it in initially.. then I pushed it again and it went in 2mm more into the jack.

[solidgear34]

explain duplex?