|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 28th, 2012, 04:57
|
#1 |
|
WE M4 GBBR open bolt issue
So I just installed the open bolt kit in my we m4. Now while doing this I managed to break my fire selector. The trigger mechanism appears to still function in semi so I put the box in and put the gun together. Now I pull the bolt back and it doesn't return forward. it gets caught on the hammer. It doesn't appear to be any higher than it was with the selector in. I checked again with my closed bolt parts and same issue. Just wondering if anybody else has had a similar issue while installing the open bolt kit before I buy a new selector thinking that will solve all my problems.
__________________
If you know the enemy and know yourself, then you need not fear the outcome of a hundred battles. If you know your enemy and not yourself, for every victory earned, you will also suffer a defeat. If you know neither the enemy or yourself, you will succumb, in every battle. -Sun Tzu |
|
|
|
July 28th, 2012, 05:37
|
#2 |
 E-01
|
Not sure what exactly you broke, or if the selector is still in there (you mentioned semi?)... but the disconnector might be doing some wonky stuff (and I'd guess basically not holding the hammer).
__________________
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
