Glock 17 problem *SOLVED*

[Pesky]

hey guys, something really werid i think it might be the hop up but i really have no idea,

okay so i just got my glock today it was used but worked fine, as soon as i took it out of the box did the same old same old when you get a new toy i took it out and shot it and it worked amazing, but then put it away and then an hour after i decided to go out and shoot it again, it was shooting fine got to the end of a mag and then all the gas sprayed out, so i filled it up again thinking it was just low and then again all the gas sprayed out in one shot, so i took the slide off and put it back on and it fixed that issue but now the bb's are going maybe 5 feet and just dropping, the slide still kicks hard but its just the bb's have no power behind them ?

anyone know what could be the problem ? thanks a lot

[Pesky]

just to help it is a TM glock 17 with a metal slide, recoil spring and just a Gurader frame, that pretty much all the upgrades that have been done to it,

[Invasian]

You could have a cracked loading nozzle....(thats the pointy thing that slams the bb into the barrel)..

[Pesky]

i just had a look at it and it doesn't seem like it is cracked, i was thinking that to but here is a picture and it doesn't seem like it is broke or cracked

[IMG][/IMG]

[heikis]

barrel with the hopup is aligned as it should? also try adjusting hopup from min to max to see if there is a difference

[durak]

you need an upgraded hammer spring if your running propane.

[Pesky]

yeah everything is lined up right and form hop up being min the bb goes 5 feet max and just goes down and with hopup max the bb almost seems like it spins up and goes at max 5 feet

[Invasian]

did you check the barrel for any obstructions ? dirt..whathaveyou...

Do you have an enhanced hammer spring installed?

[Pesky]

Originally Posted by Invasian

Do you have an enhanced hammer spring installed?

yes there is one installed!

[Pesky]

hey guys thanks to e-luder who is where i bought the gun form i messaged him before making this thread and he just got back to me and helped me figure what is wrong and i found out it was the piece circled in the picture it was stuck so i free it up and now it works perfect now! [IMG][/IMG]

[jamuke]

the floating valve in the loading nozzle looks like its improperly aligned( to me anyway) does it spring back and forth freely or is it jammed in the position it's in?

nevrmind

[Pesky]

yeah man that was the problem the floating value was stuck, but thanks though!