CA G36c Not firing

[oneintellectual]

I'm having problems with my brand spankin new CA G36C. The damn thing wont fire like it's supposed to. However, when i turn the gun upside down, then it feeds correctly wioth no problems. My brother suggested that i put silicone oil where the magazine mates with the gun, and drop a few drops of the oil to help lubricate the hop-up. Any suggestions.

[GMTII]

On the pistol grip is there a little hole for allen key to go in?...your mortor in the pistol grip might not be connecting to the mechbox. If this is the case take a allen key and tighten up the screw on the pistol grip (it will push the mortor up more) you also should probably put a drop of silicone oil on your magizine (where the bbs feed through)

If there's no allen key screw on your pistol grip then ignore this post

Erik

[Allstarr]

I belive it might be a mag probleme, i hade the same probleme, just the mag,

have u tryed to use a other mag?

[oneintellectual]

thanx, i see the allen screw under the pistol grip, now all i gotta do is find a key that is that small. And i will also see if it is the mag.

[Mantelope]

If it's a FEEDING problem, adjusting the motor won't affect it. It probably is just the mag.

[Tankdude]

it works upside down..........are you using a hicap? wind the hicap some more and then try again.