|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
November 5th, 2011, 21:14
|
#1 |
|
rs type 56-1 spring
Hey I have a type 56-1. I just picked up a 110 spring went to put it in and it seems to long to close the gear box. The new spring is about an inch longer than the stock spring that I currently have . I was just wondering should I just cut it down to the same size as the stock spring? Or do I need a new spring all together?
thanks |
|
|
|
|
November 5th, 2011, 22:11
|
#2 |
|
I just switched out my type 56 to a 110. Didn't have any problems. What brand are you using?
|
|
|
|
|
November 6th, 2011, 12:08
|
#3 |
|
the 110 spirng i picked up is made by modify
|
|
|
|
|
|
November 6th, 2011, 12:36
|
#4 |
|
You shouldn't have problems. It's when your spring is shorter that you typically get problems.
Also note that I have a Modify S110+ in my rifle and it gave me around 412 FPS on .20's, YMMV but you'll be pretty up there depending on how good of an air seal you get from your compression components (piston/piston head/cylinder/cylinder head). If you've got everything else stock I'd predict around 390-410 FPS from the 110+.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE Last edited by L473ncy; November 6th, 2011 at 12:40.. |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
