|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 8th, 2011, 18:50
|
#1 |
|
Tanaka Browning HP owners please read
Alright, just got my WE Browning HP35 in today. Nice little pistol
 Got a wee bit of a problem however. For some reason, WE forgot a pretty important part of the internal assembly.  I need the dimensions of that black little buffer thing between the two washers on the guide rod there. It keeps the rod from tilting around too much while set in place. Without it the gun will just jam over and over. Thickness and diameter are the most important. Thanks! |
|
|
|
August 8th, 2011, 19:26
|
#2 |
|
I hear they also forgot to include the grub screw to adjust the hop up, can you confirm that?
__________________
 Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life. |
|
|
|
|
August 8th, 2011, 19:49
|
#3 |
|
|
Confirmed.
They didn't include that either. Kinda curious. I'm going to check out the hardware store tommorow to see if I can rig up a new one for use. Not sure what else there is missing, the gun seems fine but I may be wrong. Just the slight cycling issues and hopup. |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
