RIS for KWA m4 g2x

Spike · August 6th, 2011, 02:10

I just picked up the gun in the title used. I tried to install a G&P RIS that I had, but it wouldn't fit. Likewise when I tried to install the KWA grips onto the G&P front end, they were too big.

Does KWA take a proprietary size RIS? Or should I just replace the delta ring/front ring? I searched and found some other people asking the same kind of questions, but no one answered them.

phloudernow · August 6th, 2011, 02:14

KWA AEGS are known to have issues in compatability, they have huge mag problems everyone i know that owns one only can use PTS pmags or some CA mags in them they have serious mag issues.

In terms of aftermarket accessories i have no idea but i think they have issues with RIS and stuff so yer not the best platform IMO for upgrade ur better off with a TM m4a1 or even a King Arms M4A1

Ghostnote · August 6th, 2011, 02:36

The kwa is pretty picky. Pts moe will fit perfectly but clone moe handguard is super tight. Do note that if you are taking off the delta ring, it is secured with red locktite so you will need proper tools for that. That being said, the threads are just like any other aeg and I personally have a madbull dd lite rail and it fit with no issues.

As for the mags, PTS, MAG, king arms, kwa(obviously), G&G, have all worked without issues. Only ones that dont feed are green label pmags.

Spike · August 6th, 2011, 19:19

Cool, I'll just get a new delta ring then. I have an armorers wrench so I should be able to swap it easy enough. I take it the threading is metric, as KWA uses the same 2 piece Marui style hop up unit?

Thanks for the heads up on the mags. Do the standard metal KA 68 rounder box set mags work?

Ghostnote · August 6th, 2011, 21:11

If normal aegs are threaded metric then it is metric. They use a marui style 2 piece unit but its a little bit more proprietary than that. You cannot just switch in a marui hop up (I have tried). The 2gx bucking is great, after about 15,000 or so rounds it still looks brand new. Yes, those mags will work, as well as the 100 version they make. I have yet to have a misfeed with the pts mags.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 6th, 2011, 02:10	#1
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	RIS for KWA m4 g2x I just picked up the gun in the title used. I tried to install a G&P RIS that I had, but it wouldn't fit. Likewise when I tried to install the KWA grips onto the G&P front end, they were too big. Does KWA take a proprietary size RIS? Or should I just replace the delta ring/front ring? I searched and found some other people asking the same kind of questions, but no one answered them. __________________ I change primaries like other people change socks.

August 6th, 2011, 02:14	#2
phloudernow Trader rating Join Date: Nov 2010 Location: Toronto - Ontario, Vancouver - B.C and Hong Kong	KWA AEGS are known to have issues in compatability, they have huge mag problems everyone i know that owns one only can use PTS pmags or some CA mags in them they have serious mag issues. In terms of aftermarket accessories i have no idea but i think they have issues with RIS and stuff so yer not the best platform IMO for upgrade ur better off with a TM m4a1 or even a King Arms M4A1 __________________ Current Lineup: VFC HK416 Custom Custom Bowie Tactical x SAI Glock 17 (TM Base), Custom SAI BLU Glock Build (Timberwolf Base) Custom Zev Noveske Shooting Team Glock 34 Project Guns Custom Zev Dragonfly G17 (Project) (In progress)

August 6th, 2011, 19:19	#4
Spike Privateer Airsoft Trader rating Join Date: Dec 2008 Location: Beaverbank, NS	Cool, I'll just get a new delta ring then. I have an armorers wrench so I should be able to swap it easy enough. I take it the threading is metric, as KWA uses the same 2 piece Marui style hop up unit? Thanks for the heads up on the mags. Do the standard metal KA 68 rounder box set mags work? __________________ I change primaries like other people change socks.

August 6th, 2011, 02:36	#3
Ghostnote Trader rating Join Date: Feb 2010 Location: Markham	The kwa is pretty picky. Pts moe will fit perfectly but clone moe handguard is super tight. Do note that if you are taking off the delta ring, it is secured with red locktite so you will need proper tools for that. That being said, the threads are just like any other aeg and I personally have a madbull dd lite rail and it fit with no issues. As for the mags, PTS, MAG, king arms, kwa(obviously), G&G, have all worked without issues. Only ones that dont feed are green label pmags.

August 6th, 2011, 21:11	#5
Ghostnote Trader rating Join Date: Feb 2010 Location: Markham	If normal aegs are threaded metric then it is metric. They use a marui style 2 piece unit but its a little bit more proprietary than that. You cannot just switch in a marui hop up (I have tried). The 2gx bucking is great, after about 15,000 or so rounds it still looks brand new. Yes, those mags will work, as well as the 100 version they make. I have yet to have a misfeed with the pts mags.

RIS for KWA m4 g2x

Upgrades & Modifications