|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 23rd, 2011, 17:33 | #1 |
airsoftsoldier250
|
G&P ak mag feeding issues
Hi I have some G&P ak mags that arent feeding properly in my dboys ak74. In single fire they work fine but in full auto Im lucky to get 1 bb into the gun every 3-4 shots.. Someone on my team mentioned they had a similar issue with their mp5 and had to add a piece to the bottom of the spring to add some tension to it but once I got my mag apart I wasnt sure exactly what I should be doing so Im here for some expert advice. thanks -Eliot
|
June 23rd, 2011, 17:47 | #2 |
Oil your mags. To do this, put 2 or 3 bb's into the mag. Then add a drop or two of silicone oil on top of the BB's, then load to full. Repeat this once or twice (WITHOUT adding more oil, just use the same oily BB's in the loader).
Add more oil when moving to a new mag. After you're done with all your mags, discard the oily BB's and you may want to clean out your loader. |
|
June 23rd, 2011, 18:08 | #3 |
airsoftsoldier250
|
Ill grab some oil and try it out thanks! So its not the spring?
|
June 23rd, 2011, 18:17 | #4 |
Could be, but try this first. Unless they're really old mags it's probably not the spring.
|
|
June 23rd, 2011, 18:52 | #5 |
airsoftsoldier250
|
Nope brand new! I was actually a little mad they didnt feed properly in full auto considering what I paid for 4 of them new vs. my mag brand ones that feed perfectly
|
|
Bookmarks |
Thread Tools | |
|
|