AK Parts not Fitting....

[Conflicts6]

Hey everyone.

I got some A.P.S external parts for my kraken AK. Here are the parts and the problems. http://shop.ehobbyasia.com/a-p-s-tel...ark-earth.html . This i have no idea how to install, any ideas? http://shop.ehobbyasia.com/a-p-s-ak7...ark-earth.html this is really weird. If you see in the second photo you can see were it mounts to the body, and its way to wide to fit into the body. Also, that piece thats under the gas tube to secure the lower hand guard is way to big. Thanks for you help.

[R.I.T.Z]

the stock tube should just slide onto the rear of the gun and screw into place. done, this is assuming that the AK uses a stick battery and is not rear wired.

[Conflicts6]

Originally Posted by R.I.T.Z

the stock tube should just slide onto the rear of the gun and screw into place. done, this is assuming that the AK uses a stick battery and is not rear wired.

it slides only a bit of the way. I will take some photos later. On a side note, these APS parts are made of really durable plastic.

[R.I.T.Z]

pictures would help alot, a description can only go so far.

[Conflicts6]

Originally Posted by R.I.T.Z

pictures would help alot, a description can only go so far.

Pics will follow in awhile. Thanks.

[Conflicts6]

here are the photos

[R.I.T.Z]

looks like a dremel is gonna be your friend here, your gonna have to mod the parts

[Conflicts6]

Originally Posted by R.I.T.Z

looks like a dremel is gonna be your friend here, your gonna have to mod the parts

i know how to fit the stock tube, but no idea how to make the front handguard fit..

[R.I.T.Z]

cough dremel cough

[Conflicts6]

Originally Posted by R.I.T.Z

cough dremel cough

yes, i know dremel will do me good , Is it really needed to have the hanguard attached to the main body?

[Styrak]

What brand is your gun?
Are the parts for a TM style AK or DBoys style AK?

[R.I.T.Z]

Originally Posted by Conflicts6

Hey everyone.

I got some A.P.S external parts for my kraken AK. Here are the parts and the problems. http://shop.ehobbyasia.com/a-p-s-tel...ark-earth.html . This i have no idea how to install, any ideas? http://shop.ehobbyasia.com/a-p-s-ak7...ark-earth.html this is really weird. If you see in the second photo you can see were it mounts to the body, and its way to wide to fit into the body. Also, that piece thats under the gas tube to secure the lower hand guard is way to big. Thanks for you help.

Originally Posted by Styrak

What brand is your gun?
Are the parts for a TM style AK or DBoys style AK?

if i remember too you have a element metal body on it?

[Conflicts6]

Originally Posted by R.I.T.Z

if i remember too you have a element metal body on it?

yes, kraken with element metal body.

[pusangani]

The kraken front end is TM style, that handguard looks like Dboys/VFC style, TM style is alot slimmer to fit into the small hole in the front end hence the tab n th kraken handguard is alot smaller, cutting away the bottom of the front end where the slot is will make it fit.

Or you could trim away the handguard's tab until it is the same size as the kraken's

No guns for kids tho

[Conflicts6]

Originally Posted by pusangani

The kraken front end is TM style, that handguard looks like Dboys/VFC style, TM style is alot slimmer to fit into the small hole in the front end hence the tab n th kraken handguard is alot smaller, cutting away the bottom of the front end where the slot is will make it fit.

Or you could trim away the handguard's tab until it is the same size as the kraken's

No guns for kids tho

aha! perfect idea. Thanks.