Removing Madbull JP handguard kit

[highny]

Hey there!

I just got a Madbull JP kit along with a upper receiver. The guy said he can't get it off, so I thought I give it a try.

Now I'm stuck here... Don't have a clue on what I could do to remove the last piece of this puzzle.

The JP03 part won't come off the receiver!

Does anyone know the trick to getting this off because I don't want to risk damaging it at all!

Any help would be awesome!\




Update:

I got it off by using 2 strip wrench to get it off! After, one of the new wrench broke haha.

Case close.

[m102404]

In essence it comes off like any other RAS....

once you've got the gas block and gas tube off....you can:
- take out the 6? little allen head screws to remove the handguard and then undo the housing that pins the barrel to the receiver.

- if it's really hard to get the housing off...then you can leave the hang guard on and use that to help crank the housing off.
- you can also use a strap wrench to get the leverage you need

- if some dummy has used loctite/glue to hold the housing on....then you're either going to have to heat it up enough to break the bond (hard to do) or you're going to have to cut it off.

Check madbullairsoft.com's site....licensed product section...JP rifles...in the details of the handguards there's some wire-frame diagram pics of how it assembles.