TM M14 hopup unit

[Reckless]

has anyone found a source for the Stock TM M14 hopup unit... or is there an aftermarket unit that is the same or better?

[Rock 'N' Roll Outlaw]

http://shop.ehobbyasia.com/marui-hop-up-set-m14.html

First search result on Google.

[Reckless]

okay removed my smart ass post...

I have looked... Ehobby doesn't have any, toyko model doesn't have any.. etc etc

gunner airsoft has element hop chambers... are these worth it?...

[stubs]

i just picked up an element to replace a kart hop up but i havent had the chance to install it yet.... looks like good quality tho

[Reckless]

yeah that's basically what I'm going through...

have a JAE-100 enroute .. just for the stock (and whatever exterior bits are deemed suitable) ... everything is being replaced with G&P, Prometheus, TM (80% of these parts I would have replaced in a build like this with a TM base anyways)

... from what I have seen/have been told the G&P hop up unit is also a suitable/acceptable replacement to the TM hopup unit.

[stubs]

i dont belive g&p makes an m14 thati have found anyways you'll be the 4th in the country with a jae 100 i gutted everything other then the stock the gearbox was decent but it wont last long my first shoot out of the box was 415 but there were no reinforced parts internally, the hop-up and barrel arn't great but will work if you have to check the outer barrel for being bent mine as well as peacekeepers was replaces with tm barrel or other, but my gun have been completly rebuild with g&p recieverg&p gearbox and internals

[Reckless]

yeah G&P makes a hop unit.. it's a hop and barrel set.. 6.08 barrel in short and long

http://www.gp-web.com/en/productspop.php?pid=2093

and yeah total internal replacement will be required... I owned a kart EBR as my first "real" airsoft gun so I know what I'm up against for my goals. I wish I knew then what I do now .. I really miss that rifle, not much practicality for skirmishing .. but lord was it pretty to look at

[stubs]

recieved the element hop up unit good build seems to be a little loose around the nozzle compared to a tm brand but works and funtions good

[PHARAOH]

sorry to necro this thread, but i am looking for a m14 hopup that will work with KA midcap mags, right now my CYMA and KART hopups do not reach far enough into the mag to feed. will a TM, Element or G+P hopup do the trick?


thanks

[Amos]

Originally Posted by PHARAOH

sorry to necro this thread, but i am looking for a m14 hopup that will work with KA midcap mags, right now my CYMA and KART hopups do not reach far enough into the mag to feed. will a TM, Element or G+P hopup do the trick?


thanks

Shave 2mm off of the BB retainer