Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Gear Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

LBT 9040a (RRV) compatible back plate carrier

:

Gear Discussion

Reply
 
Thread Tools
Old May 2nd, 2010, 22:30   #1
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
LBT 9040a (RRV) compatible back plate carrier

Like the title say, I'm searching for a back plate carrier compatible with the LBT 9040a plate carrier. Also known as a RRV vest or Rodesian recon vest.

I saw how the Eagle Industrie back plate carrier work, with fastex bucles, but I don't have compatible bucles or any other attachements on the LBT rig. On the LBT website, I don't see any back plate carrier, wich they should logically have.

So I'm wondering if there is another gear maker that have something that would be compatible with minimum alterations.

Tanx fellow geardos.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old May 3rd, 2010, 23:39   #2
huang
 
Join Date: Dec 2001
Location: Scarborough
I will have them in a couple days but in coyote tan.
huang is offline   Reply With Quote
Old May 4th, 2010, 17:20   #3
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
Interesting. I really need it in OD, but if I ever get a new rig in Coyote tan, I will take a look at yours.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old May 4th, 2010, 17:45   #4
Drake
E-01
 
Drake's Avatar
 
Join Date: Dec 2001
Location: Montreal, QC
Even on the Eagle RRV, the backplate carrier isn't directly integrated: the fastex buckles on the rear plate attach to adapter straps which are fastened to the PALS strips on the RRV's shoulder pads.

This is the only semi-clear picture I could find to illustrate it:



On the right picture, see how the two loose male fastex clips are part of straps which are attached to the bottom strip on the shoulder pads?

So you just need the backplate carrier and straps with the same type of buckles (beware PANTAC's backplate uses the newer buckles, which aren't compatible with the old ones). The straps are just loops with snaps.
__________________
Drake is offline   Reply With Quote
Old May 4th, 2010, 17:47   #5
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
Is the backplate comming with the adaptor straps? I was thinking of buying replacement buckles from SupplyCaptain an be done with it.
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
Old May 4th, 2010, 17:52   #6
Drake
E-01
 
Drake's Avatar
 
Join Date: Dec 2001
Location: Montreal, QC
I know the Eagle and PANTAC RRVs come with the straps (and I think Flyee, too); not sure about BHI, LBT, etc.

Worst case get the adapters separately from eBay and change the buckles if necessary

http://cgi.ebay.ca/Eagle-Industries-...item19ba20401a
__________________
Drake is offline   Reply With Quote
Old May 4th, 2010, 18:02   #7
FOX_111
Le Roi des poissons d'avril
 
FOX_111's Avatar
 
Join Date: Dec 2003
Location: Terrebonne, Québec
Oh, thanks!
Buying time!
__________________

Vérificateur d'âge: Terrebonne
FOX_111 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Gear Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 01:20.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.