Would A G&P M120 Motor Pull a Sp125 Spring with Tripple Torque Gears With Good ROF?

[Conflicts6]

Hey,

Its in the title. Thanks for your help before hand. I have an Intelect 9.6v 3600MaH Large battery.

[Shooting Addict]

G&P gears?

[Conflicts6]

Originally Posted by Shooting Addict

G&P gears?

Nope. Element Max Torque gears.

[Cheesevillage]

Originally Posted by Shooting Addict

I'm assuming that you havn't bought anything yet so I'd say for the moter get a TM one as for which one it's up to you but ussaly with TM moters the higher the number the higher the ROF. Ditch element and avoid it like the
plague and get some good gears,like prothemis(spelling) if you can afford it. The s120 is around 420 fps so the 9.6 should work but a 10.8 would be better.

[Styrak]

Originally Posted by Shooting Addict

Ditch element and avoid it like the
plague and get some good gears,like prothemis(spelling) if you can afford it. The s120 is around 420 fps so the 9.6 should work but a 10.8 would be better.

First of all, shut your face. Element gears are awesome. I have (probably the same) 300% torque gears that he has and they're high quality steel gears. Have you had first hand experience with them? Didn't think so.

As for the second part, NO he does not need a 10.8v
9.6v is already plenty enough.

[Shooting Addict]

Originally Posted by Styrak

First of all, shut your face. Element gears are awesome. I have (probably the same) 300% torque gears that he has and they're high quality steel gears. Have you had first hand experience with them? Didn't think so.

As for the second part, NO he does not need a 10.8v
9.6v is already plenty enough.

i used element gears in my MP5, three teeth broke of after about 200 shots at about 430 fps so I wouldn't recommend them. As for the battery a 9.6 would do nicely but I would use a 10.8 for better ROF and trigger responce. Sorry about my second post I worded it bad I think I wasn't fully awake yet.

[Azathoth]

Your motor is more than capable or pulling the spring.

Decent ROF???

I used to run 9.6v or 7.4lipo (soon to exclusive lipo or A123 cells) with torque (systema) and triple torque gears(prometheus). You get a mechanical advantage through the gears in pulling the spring but your ROF plummets. From Standard torque to triple torque my ROF went from ~22ish with the 7.4 to 10RPS with the triple torque. Measured with a paintball chrono.

As for ELEMENT products. Some good, some bad. It can be a real crapshoot for QC on the same product as well. If you can get the parts from Friends in China who are active players then that is win. If not getting Brand name parts in Asia from friends over sea's is also win.

[voorhees -FWA-]

I stand behind Styrak's statement I use the 300% torque up Element gears in M4 with a 11.1 Lipo with no problems. My brother uses the 200% torque up and NO problems. Get what you want but I recommend the Element gears also comes with a poly-carb piston body. Best BANG for your buck haha.. See what I did there?

[Skladfin]

Originally Posted by Shooting Addict

i used element gears in my MP5, three teeth broke of after about 200 shots at about 430 fps so I wouldn't recommend them.

Do not confuse inadequate shimming with poor quality gears.

[Conflicts6]

Yes, They are awesome gears. I don't want to get any other ones. These ones are hardend, and helical. They are straight from the Chinese company, and they haven't even shown signs of wear through about 7000 rounds. These are a step up from the 300% ones. The are called Element Max Torque. Back to the motor, would it be a good choice for my setup? Woult the torque gears take stress off the motor? The shim job was awesome.

[Amos]

I don't know what the hell you're all on, but element gears are garbage.

[XerxesYoung]

It's been working great for me for the last full year.

[Shooting Addict]

Originally Posted by Amos

I don't know what the hell you're all on, but element gears are garbage.

Sombody who finnaly agrees with me.

[Amos]

I don't agree with you,

I'm posting from personal experience. From the sound of what happened to you, it was user-error.

[Conflicts6]

Lets get back to the motor ...please